Download Print this page

Advertisement

Quick Links

•Always wear safety glasses when working with any type of battery
•Do not short circuit the battery terminals
•Do not connect the battery terminals with reverse polarity
•Do not charge more than 1C or 175A max (C=amp hours of the battery pack)
•Do not continuously discharge more than 1C or 175A max (C=amp hours of the battery pack)
•Do not momentarily discharge more than 600A for 3 seconds
•Do not momentarily discharge more than 300A for 30 seconds
•Do not open the battery pack for any reason, there is a risk of electric shock.
•Do not connect batteries in series to obtain a higher voltage pack.
•Do not connect more than 3 batteries in parallel
•Only parallel connect battery packs of identical voltage, capacity, and age
Charge at least every six months
If storing unused for extended periods, disconnect loads and store at 50% state of charge
If storing unused for extended periods, store at room temperature
Make sure the battery pack voltage is correct for the application.
Do not connect with reverse polarity.
Always secure battery pack in place with mounting strap or battery hold down kit
Use only M8 or 5/16 ring terminals
Torque terminal bolts to 150-155 in/ft - Do not over tighten
If an inverter or DC-DC voltage converter will be used, connect battery terminals prior to
connecting an inverter or converter. Terminal arc damage is not covered under warranty.
Lithium (LiFePo4)
Battery Owners Manual
Battery Packs Covered
12V96Ah
24V72Ah
12V144Ah
24V144Ah
12V216Ah
24V300Ah
12V288Ah
12V600Ah
36V72Ah
36V105Ah
WARNING!
Storage
Installation
48V72Ah
48V105Ah
48V160Ah
48V320Ah

Advertisement

loading

Summary of Contents for EB 12V96Ah

  • Page 1 Lithium (LiFePo4) Battery Owners Manual Battery Packs Covered 12V96Ah 24V72Ah 36V72Ah 48V72Ah 12V144Ah 24V144Ah 36V105Ah 48V105Ah 12V216Ah 24V300Ah 48V160Ah 12V288Ah 48V320Ah 12V600Ah WARNING! •Always wear safety glasses when working with any type of battery •Do not short circuit the battery terminals •Do not connect the battery terminals with reverse polarity...
  • Page 2 Charging Method The approved charging method for Eco Battery Lithium (LiFePo4) batteries is CC/CV (constant current/constant voltage). If your battery charger has an adjustable absorption setting, it should be set to 1 hour max. If your battery charger has an adjustable float setting, it should be set at 13.5V or off.
  • Page 3 Troubleshooting Problem Possible Causes Remedy Battery won't charge, but has Warm the battery or wait until Battery temperature is less than 34F voltage at terminals ambient temp rises above 34F Battery won't discharge, but has BMS has been damaged due to short Contact Eco Battery voltage at terminals circuit or over current...

This manual is also suitable for:

24v72ah36v72ah48v72ah12v144ah24v144ah36v105ah ... Show all