GE Profile J2B918SELSS Dimensions And Installation Information

J2B918SEL
GE Profile 30" Free-Standing Dual-Fuel Double Oven Range
™
Dimensions and Installation Information (in inches)
Note: Dimension from the wall to the front
of the closed door handle is 29". Depth to
front edge of cooktop 25-1/4". Factory set for
Natural Gas. A set of LP orifices is included
with each range for LP conversion.
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.
For answers to your Monogram, ®
GE appliance questions, visit our website at
®
ge.com or call GE Answer Center
800.626.2000.
Installation Information (Dimensions in inches)
30
47-3/4
26-1/4
46-3/8
GE Profile ™ or
service,
®
NOTE: Make gas connections on
the left side and electrical conections
on the right side of the
cutout opening.
30" FS Gas Ranges-CL
Recommended area
for through-the-wall
connection of pipe
stub/shut-off valve.
This area allows
flush installation
to rear wall.
Recommended area for
120V outlet on rear wall
7-1/2
and area for thru the wall
connection of pipe stub
Recommended area for
and shut-off valve
through-the-floor connection
of pipe stub/shut-off valve.
36-1/4±1/4
4
30 Recommended acceptable
electrical outlet area. Orient
the electrical receptacle so the
3
length is parallel to the floor.
4
3 8
3
Wall-Mounted
9
Recommended common area
for gas outlet and electrical
outlet for GE free-standing
2-1/4
gas range models
2
Product is shipped with 4-prong
plug. Recommended outlet is
30
a NEMA 14-50R receptacle.
2-1/2
8
24
2
9
Recommended area for
thru the floor connection
of pipe stub and shut-off valve
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Specification Created 4/06
221210