Advertisement
Quick Links
6
Connect the water supply
All fittings are supplied apart from the isolation
valve.
Valves and fittings must
!
be sealed with PTFE tape.
Braided hose to
Command Centre
Hot water isolation valve
MAINS inlet (supplied
(not supplied)
with Command Centre)
1/2" BSP adaptor
Strainer
Mains water
isolation valve
(not supplied)
2
See
Red marked
Blue marked
braided hose
braided hose
to mixer tap
to mixer tap
7
Command Centre connections
Mains In
Mains potable water supply.
USB
Connected to the Tap.
Boiling out
Red silicone tube from tap. Cut to length.
Chilled out
(CS) Blue JG pipe from tap. Cut to length.
Vent
Clear silicone tube from tap. Cut to length.
Sparkling out
(CS) White JG pipe from tap. Cut to length.
8
Cleaning and general maintenance
Wipe surfaces with a damp cloth and then wipe dry
with a clean, dry cloth. Do not use disinfectant sprays
without wiping dry afterwards.
T-piece
2x male
adaptor
WMK25927
AS/NZS 3718
Zenith Heaters Limited
IRD/GST No. 95 640 729
18 Kawakawa Place,
Westgate, Auckland 0814
New Zealand
Ph +(64 9) 838 8612
Free Call 0800 558 055
zenithwater.co.nz
Installation instructions
Zenith
HydroTap
Celsius Arc & Celsius Cube
B, CS
Visit our website to
download the manuals
Advertisement
Related Manuals for Zenith HydroTap Celsius Arc
Summary of Contents for Zenith HydroTap Celsius Arc
- Page 1 Mains potable water supply. AS/NZS 3718 Connected to the Tap. Boiling out Red silicone tube from tap. Cut to length. Zenith Heaters Limited Chilled out (CS) Blue JG pipe from tap. Cut to length. IRD/GST No. 95 640 729 Vent Clear silicone tube from tap.
- Page 2 Positioning Familiarise yourself with the tap connections Using these instructions Position the tap such that it dispenses into the Please refer to all safety and installation requirements Boiling models Sparkling models sink bowl with clearance for a cup or tea pot. detailed in the Quick start guide provided with the Ensure that taps are positioned to minimise HydroTap Command Centre, and HydroTap Command...