Canon CR-N300 Installation Manual

1
2
REMOTE CAMERA
BIE 7292 000
- -
ENGLISH
Installation Guide
Important Information
© CANON INC . 2021 Printed in Japan
This "Installation Guide Important Information" is comprised of pages [1
/
Please be sure to read the "Safety Precautions" section for correct use
reading this "Installation Guide , keep it in a readily
/ Important Information"
accessible location for future reference This camera is for indoor use only
.
• The cameras described in this document may include models not
available in your country and or region
/ .
• HDMI is a trademark or registered trademark of HDMI Licensing
Administrator , Inc . in the United States and other countries .
All other company or product names used in this document are
•
trademarks or registered trademarks of their respective holders
• The contents of this document are subject to change without any prior
notice
.
The latest user manuals and software , etc . for this product can be
downloaded from the following website . The user manuals explain the
camera settings and operations Read them carefully before using the
.
camera to ensure correct use .
global canon ncsp
. /
List of Downloadable Files
User Manuals Software
• Settings Guide • Camera Search Tool
• Remote Camera Control • Remote Camera Control
Application User Manual Application
Firmware
only provided at time of update
(
Check Included Items
Camera
Ceiling Plate
Camera to Mount Safety Wire 10 cm 3 94 in
- - ( . .)
M3 Screw x 4L ( 2 ) ( for camera - to - mount safety wire , and camera mounting
Safety Wire 3 m ( 9 . 8 ft .)
Wire Stopper for safety wire
( )
M3 Screw x 6L ( 4 ) ( for wire stopper )
Compact Power Adapter
Power Cable
IR Remote Controller
Size AAA Battery ( 2 ) ( for IR remote controller )
Printed Materials
Symbols used in this manual
Parts indicated in the "Installation Guide Important Information" [2
/
with this icon are not included with the camera and should be prepared
,
by the user .
M: Outer diameter of the screw shaft mm
( )
L: Length ( mm )
Safety Precautions
Warning
Failure to follow the instructions may
result in death or serious injury
Do not install in the following places:
Places in direct sunlight near heat generating objects
• , -
to high temperatures .
• Places near fire sources or flammable solvents
Humid or dusty places
• .
• Places subject to oily smoke or steam .
• Confined or enclosed places .
Failure to do so may result in fire or electric shock
Notes on installation at high places
2] and [2 2]
/ / . • For installation or inspection of this camera
. After purchased the product .
Install the camera in a way that ensures sufficient holding strength
•
. according to the mounting place such as the wall
sure that the mounting place can sufficiently support the total weight
including the mounting parts and reinforce it if necessary
Prepare fixing screws suitable for the location and type of surface the
•
camera is to be installed .
Periodically check the mounting brackets and screws for rust and
•
loosening
.
. • Do not install in unstable places , places subject to significant vibration or
impact or places subject to salt damage or corrosive gas
,
Be sure to attach the safety wire when installing the camera
•
• Use the included ceiling plate to install the camera
only the tripod screws
.
Failure to do so may result in the camera falling or other accidents
General notes on the camera
• If any defective conditions such as smoke ,
odors damage or cracks on the external case are discovered
,
stop using the camera unplug the power cable from the outlet
,
cable for PoE + power supply ), and contact your nearest dealer
compact power adapter near the power outlet and avoid placing objects
around the power plug so that the power can be turned off immediately in
the event of an emergency .
Do not touch the camera or the connecting cables during a thunderstorm
•
Do not disassemble or modify the camera
• .
• Do not scratch , pull , or forcefully bend the cables
connections .
Do not spray the camera with water or otherwise make it wet
• ,
• Do not touch the camera , the compact power adapter
power plugs , or power outlets with wet hands
Do not allow water metal or other foreign objects to enter the camera
• ,
• Do not use flammable sprays near the camera
• Do not leave the compact power adapter (
power supply connected when the camera is not in use for long periods
)
)
• Do not use flammable solvents such as alcohol
when cleaning the camera .
Do not block the air exit vents
• .
Failure to do so may result in fire or electric shock
Notes on Power Supply
• Use only the included compact power adapter when using an AC adapter
The included compact power adapter and power cable are for this
•
product only . They cannot be used for other devices
• Do not place heavy objects on the power cable
)
power supply or pull forcibly bend scratch or modify it
) , ,
• Do not allow metal pins or debris to touch the power plug or terminals
• Wipe any dust off of the power plug . Also ,
power outlet in a dusty area take measures to prevent tracking
,
• Make sure the power plug ( or the LAN cable for PoE
seated all the way , and do not use it when the insertion is insufficient
Do not use a damaged power plug or a loose power outlet
•
manner that exceeds the rating of the wiring device such as connecting
multiple plugs to an outlet .
Failure to do so may result in fire or electric shock
2]
/
Notes on batteries
• Do not put batteries in the fire , or do not heat
them .
Do not charge the included batteries
• .
• Do not use batteries other than those specified
Failure to do so may result in fire or electric shock
Do not use the product at:
Places where the use is prohibited such as in hospitals and on airplanes
• ,
Places within reach of babies and toddlers
•
Use at such places can cause equipment to malfunction due to
radio waves and lead to accidents
injuries
.
Caution
.
or locations subject Notes on installation
,
• Installation must be carried out safely and securely in accordance with the
( alcohol , thinner , fuel , etc .).
relevant regulations for technical standards of electrical installation
Failure to do so may result in accidents
Notes on installation
.
• Take care not to damage wiring or piping
Failure to do so may result in damage to surrounding items
, consult the dealer where you
General notes on the camera
• Do not touch the edges of metal parts with bare hands
• Be careful not to get your fingers caught when installing
, ceiling , etc . Also , make
Failure to do so may result in injuries
.
Notes on batteries
• Remove the batteries when they have been used up or will not be used for
a long time
.
• When replacing the batteries
Also , do not use different types of batteries together
Make sure and of the battery are oriented correctly
• + -
.
• If any liquid from inside the battery gets on your body due to leakage
.
rinse it off thoroughly with water
. Do not install it with
Failure to do so may result in injuries and malfunctions
.
Important
strange sounds , heat , strange
immediately
,
Do not install the camera in places where radiation
•
or the LAN
(
waves or strong magnetism are generated
. Place the
audio disturbance noise
,
• We recommend the installation of a lightning arrester
device ) as a measure against failures caused by lightning strikes
Take measures to remove static electricity before performing any
•
.
procedures .
Do not connect the compact power adapter to a transformer
•
, or put a load on their
• If there is condensation
dissipates .
.
, cable connectors ,
• Do not hold the device by the camera head
.
• Do not turn the camera rotator by hand
.
• After turning off the power
.
five seconds .
or the LAN cable for PoE +
Do not point the camera at strong light sources
•
.
clear day or strong artificial light sources
, paint thinner or benzine
the image sensor could be damaged
Do not carry the camera on a tripod
•
.
Precautions for Use
.
.
Compliance with Applicable Laws
( or the LAN cable for PoE +
that your use of this product may subject you to certain laws
.
regulations , including but not limited to
.
property and publicity laws
if the connection is made to the
any resulting recordings or footage complies with applicable laws
.
regulations .
+ power supply ) is
Canon Inc . and its af fi liates shall have absolutely no liability with respect
.
to any claims made by third parties that your use of this product does not
or use it in a
,
comply with applicable laws
brought against you by third parties alleging non
or otherwise violates any third party
or proprietary rights as a result of your use of the product
.
responsible to you for any liability whatsoever resulting from your use
installation of this product
Limited Warranty: Please check the in
, short circuit or disassemble
about the limited warranty that pertains to your product
Installation: This product should NOT be installed outdoors
responsible for the proper installation of this product
.
by law , Canon Inc . and its af
.
with respect to any damages or liabilities associated with the improper use of
or the installation of this product
or any third parties as a result of any such improper use or installation of this
.
product , whether or not the installation of this product was by you
.
third party
.
Privacy:
• Do not install this product in areas where people have a reasonable
or cause electric shock and
,
expectation of privacy
rooms
• Some jurisdictions require signage disclosing the existence of camera
equipment. Please check your own area's laws for requirements.
Failure to follow the instructions may
Making audio recordings is heavily regulated and can vary significantly
•
result in injuries or property damages
.
by area
recordings
OTHER IMPORTANT INFORMATION: Please see other important information
pertaining to the use of this product by reading our Settings Guide
.
can also be found at global
.
About lamp
.
.
POWER lamp
.
. Green light
BLINKING
.
Green light ON
Green light
BLINKING
, replace both batteries at the same time .
Orange light ON
.
Green light
.
BLINKING
,
.
OFF
.
OFF
Green light
BLINKING
X rays strong radio
, - ,
. It may cause video and Tally lamp
or malfunctions
, .
Red light ON
( a surge protection
.
Green light ON
.
Before using the camera
, please wait to power on , until the condensation
Initial settings
.
Be sure to make the initial settings before use
.
made
, do not turn the power on again for at least
using as a USB camera
such as the sun on a
(
). Internal components such as SERVICE switch settings
.
Set the camera number to be operated by the IR remote controller with the
. two switches on the left
When using as a USB camera
to the bottom
Switches should be set before turning on the power
Disclaimer
( )
intellectual Property Rights: Please note
/
, rules and
, privacy , wiretapping and intellectual
Please be sure your use of this product and or
. /
, rules and
rules and regulations and any resulting claims
,
- compliance with such laws ,
' s intellectual property , personal , privacy
We are also not
.
, and / or
, and / or any loss of any recordings or footage .
- box materials for more information
.
You are solely
.
. To the extent permitted
fi liates shall have absolutely no liability to you
,
or for any personal injuries sustained by you
,
, or by any
, including but not limited to , bedrooms , dressing
locker rooms and rest room facilities
, .
. Please check laws in your jurisdiction before making any audio
.
, which
canon ncsp prior to using this product
. / , .
STATUS lamp Status
OFF Power being switched on
OFF POWER ON
Signal received from IR remote
OFF
twice controller
( )
Orange light ON Standby
OFF Changing to or from standby
Orange light ON Insufficient power
Orange light Pan / Tilt position error ,
BLINKING firmware being updated
Orange light
Device failure
BLINKING
Status
Streaming
Preparing
streaming
If the initial settings are not
.
HDMI SDI output and IP streaming cannot be executed Also
, / . ,
, change the Service switch after the initial settings
.
, the 3rd switch from the left is to be switched
.
.
USB camera
when
.