Advertisement
Quick Links
Pressure switches for gas DG..t
Contents
1 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2 Checking the usage . . . . . . . . . . . . . . . . . . . . . 2
3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
4 Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
5 Adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
6 Pressure switches with manual reset . . . . . . . . 4
7 Tightness test . . . . . . . . . . . . . . . . . . . . . . . . . . 4
8 Maintenance cycles . . . . . . . . . . . . . . . . . . . . . 4
9 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
10 Technical data . . . . . . . . . . . . . . . . . . . . . . . . 5
11 Certification . . . . . . . . . . . . . . . . . . . . . . . . . . 6
12 Logistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
13 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
oPeRAtInG InstRUCtIons
Cert. Version 04.20 · Edition 01.22 · EN · 03251549
1 sAFetY
1.1 Please read and keep in a safe place
Please read through these instructions care-
fully before installing or operating. Following the installa-
tion, pass the instructions on to the operator. This unit
must be installed and commissioned in accordance
with the regulations and standards in force. These
instructions can also be found at www.docuthek.com.
1.2 explanation of symbols
1 , 2 , 3 , a , b , c = Action
➔ = Instruction
1.3 Liability
We will not be held liable for damage resulting from
non-observance of the instructions and non-com-
pliant use.
1.4 safety instructions
Information that is relevant for safety is indicated in the
instructions as follows:
DAnGeR
Indicates potentially fatal situations.
WARnInG
Indicates possible danger to life and limb.
CAUtIon
Indicates possible material damage.
All interventions may only be carried out by qualified
gas technicians. Electrical interventions may only be
carried out by qualified electricians.
1.5 Conversion, spare parts
All technical changes are prohibited. Only use OEM
spare parts.
Advertisement
Related Manuals for Honeywell DG-T Series
Summary of Contents for Honeywell DG-T Series
-
Page 1: Table Of Contents
Pressure switches for gas DG..t oPeRAtInG InstRUCtIons Cert. Version 04.20 · Edition 01.22 · EN · 03251549 1 sAFetY 1.1 Please read and keep in a safe place Please read through these instructions care- fully before installing or operating. Following the installa- tion, pass the instructions on to the operator. -
Page 2: Checking The Usage
2.3 type label 2 CHeCKInG tHe UsAGe Gas pressure switches DG..T for monitoring increasing and decreasing gas or air pressure. negative type Positive pressure pressure DG..T, Gas, air, flue gas, Approval and type: see type label. Air, flue gas DG..FT biogas For detailed information on the adjusting range, mean DG..HT,... -
Page 3: Wiring
4 WIRInG CAUtIon If port 4 is at the top, IP 65 will not be satisfied. CAUtIon IP 65 – To ensure that the DL is not damaged during operation, note the switching capacity, see page 5 (10 Technical data). ➔... -
Page 4: Pressure Switches With Manual Reset
Pressure switches (DG..t, DG..Ft, DG..st): 6 PRessURe sWItCHes WItH MAn- Mean UAL Reset Adjust- switch- Max. inlet ➔ DG..NT locks off if the pressure drops to the value type range differ- pressure set using the hand wheel. "WC ential psi (mbar) ➔... -
Page 5: Technical Data
10 teCHnICAL DAtA NO 2 10.1 safety information Safety information, see Safety manual DG (identical to DG..T) – www.docuthek.com. 10.2 Ambient conditions Maximum medium and ambient temperatures: DG:-40 to +140°F (-40 to +60°C). DG..S: 5 to +140°F (-15 to +60°C). Long-term use in the upper ambient temperature range accelerates the ageing of the elastomer ma- terials and reduces the service life (please contact manufacturer). -
Page 6: Certification
FoR MoRe InFoRMAtIon The Honeywell Thermal Solutions family of products includes Honeywell Combustion Safety, Eclipse, Exothermics, Hauck, Kromschröder and Maxon. To learn more about our products, visit ThermalSolutions.honeywell.com or contact your Honeywell Sales Engineer.