PAROH Active Living DCX-25 User Manual

Wireless
Bathroom Pull Alarm
RECEIVER USER MANUAL
PARTS & FUNCTION
Speaker
Belt Clip
ID
Zone select
button
Melody
se le ct o r
Reset
Reset
Battery Compartment
MOUNTING
Reset
Hang on the wall
P l e a s e r e p l a c e b a t t e r i e s b y m a k i n g s u r e t h e b a t t e r i e s m a t c h t h e c o r r e c t
p o l a r i t y + / - m a rk i n g s a n d a l w a y s r e p l a c e w i t h t h e s a m e s t a n d a r d b a t t e r i e s .
D CX-25
LA140
Function switch
Vibration &
Melody
Vibration
Melody
OPEN
POWER
1. Slide to open the battery
cover
2. Insert 2 AA batteries
3. Close the battery cover.
OPEN
Using 2 x AA size Battery
CODE MATCHING & TUNE SELECTION
Step 1: Insert batteries to the transmitter to be used e. g. door bell.
Step 2: Insert batteries to the receiver to be used (chime unit).
Step 3: Enter pairing mode for receiver
(pager unit). Press and hold the
zone select button for 3 seconds.
The LED #1 will flash.
Step 4: Press the button again to move to the zone
you wish to pair with.
Press melody selector to scroll through the
melodies. Once you hear your preferred melody,
do not press again as it is now selected.
Step 5: Once the zone and melody are selected with the zone icon flashing,
trigger the transmitter once to pair. If successful, the receiver
wi ll generate a short tone. Press the
the system is ready to use.
To stop the vibration whilst the receiver is altering, press the reset button
Clear the transmitter on the Receiver memory
First, press and hold the button for 3 seconds to enter the pairing mode.
Press the button to move to the zone which is to be deleted. Press and
hold the and buttons together for 3 seconds.
The receiver will generate a tone to indicate the transmitter on this zone has
been deleted.
Change the melody in desired zone
First, press and hold the button for 3 seconds to enter the pairing mode.
Press the button to move to the zone then press the
button to select the melody required. Press the
mode is exited.
BATTERY LOW INDICATOR
If a zone LED light is blinking, it indicates that the battery is low for this
transmitter. You must replace the battery as soon as possible.
If the Receiver beeps every 5 seconds, this indicates the Receiver batteries are
low. You must replace the batteries of the Receiver
PAROH LTD B24 9FD
www.paroh.co.uk
Made in China
The crossed wheelie bin symbol reminds you
of your obligation to help reduce the impact
on the environment by recycling this product
correctly. Please contact your local authority
or retailer for information concerning the
correct disposal of this product.
button to exit pairing mode,
button until the pairing
ISO13485
R&TTE
RoHS2
Compliant
0197
Directive
2011/65/EU