Advertisement
Available languages
Available languages
Quick Links
H-4871, H-4872
FIRE EXTINGUISHER
CABINET
TOOLS NEEDED
Drill (Optional)
Phillips Head Screwdriver
Plexiglass Window x 1
1. Attach handle to door using Phillips head screw
driver and two flat end screws included in hardware
bag. (See Figure 1)
2. Attach latch to inside of door using Phillips head
screw driver and two self-drilling screws included in
hardware bag. (See Figure 2)
3. Remove protective film from plexiglass window and
place it on inside of door. Fold mounting clips over
plexiglass to secure. (See Figure 3)
4. Place safety label on front of door under handle.
Figure 1
PAGE 1 OF 6
1-800-295-5510
uline.com
Handle x 1
PARTS
Flat End Screw x 2
Latch x 1
ASSEMBLY
Figure 2
Figure 3
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
Self-Drilling Screw x 2
Safety Label x 1
0621 IH-4871
Advertisement
Summary of Contents for U-Line H-4871
- Page 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-4871, H-4872 1-800-295-5510 uline.com FIRE EXTINGUISHER CABINET TOOLS NEEDED Drill (Optional) Phillips Head Screwdriver PARTS Plexiglass Window x 1 Flat End Screw x 2 Latch x 1 Self-Drilling Screw x 2...
- Page 2 MOUNTING WALLS WITH 2 X 4" STUDS Mount cabinet securely to studs using four #10 x 1¼" wood screws installed through mounting holes in cabinet. SHEETROCK Mount 3/4" board to the wall using 3/16" toggle bolts. Height and width of the board is dependent on cabinet size.
-
Page 3: Herramientas Necesarias
H-4871, H-4872 800-295-5510 uline.mx GABINETES PARA EXTINTOR DE INCENDIOS HERRAMIENTAS NECESARIAS Taladro Desarmador con Cabeza (Opcional) Phillips PARTES 1 Ventana de Plexiglás 2 Tornillos con Extremo Plano 1 Cerrojo 2 Tornillos Autorroscantes 1 Asa 1 Etiqueta Adhesiva de Seguridad ENSAMBLE 1. -
Page 4: Montaje
MONTAJE EN VIGAS DE PARED DE 2 X 4" Fije el gabinete de forma segura a las vigas usando cuatro tornillos para madera #10 de 1⁄" colocados a través de los orificios para instalación del gabinete. PLACA DE YESO Fije una placa de 3/4" a la pared usando pernos acodados de 3/16". -
Page 5: Outils Requis
H-4871, H-4872 1-800-295-5510 uline.ca ARMOIRE À EXTINCTEUR OUTILS REQUIS Perceuse Tournevis cruciforme (facultatif) PIÈCES Vitre en plexiglas x 1 Vis plate x 2 Loquet x 1 Vis auto-foreuse x 2 Poignée x 1 Étiquette de sécurité x 1 ASSEMBLAGE 1. Fixez la poignée à la porte à l'aide d'un tournevis Figure 2... -
Page 6: Installation
INSTALLATION MURS AVEC MONTANTS DE 2 X 4 PO Fixez l'armoire solidement aux montants à l'aide de quatre vis à bois n° 10 x 1 ¼ po installées à travers les trous de montage de l'armoire. PLAQUE DE PLÂTRE Fixez un panneau de 3/4 po au mur à l'aide de boulons à...