Casio Baby-G BG2000-1 Operation Manual

MA0612-EA
About This Manual
About the Display
• The display of the watch is divided into three areas: main (center), upper, and lower.
• You can select either of two settings for the main display area:
Regular (background/figure color combination same as the upper and lower
display areas) or Reverse (background/figure color combination opposite that of
the upper and lower display areas).
• The initial factory default setting for the main display area is "12H", which switches
between Regular and Reverse automatically every 12 hours.
• See "Main Display Area Style" for information about changing the main display area
style.
Regular
General Guide
• Press C to change from mode to mode.
• In any mode (except when a setting screen is on the display), press B to illuminate
the display.
Timekeeping Mode
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
• Pressing D in the Timekeeping Mode will toggle between the Time/Day screen and
the Day/Time screen.
Time/Day Screen
PM indicator
Day of week
Read this before you set the time and date !
The times displayed in the Timekeeping Mode and World Time Mode are linked.
Because of this, make sure you select a city code for your Home City (the city where
you normally use the watch) before you set the time and date.
• To view the current Home City code setting, press A while in the Timekeeping
Mode.
• For full information on city codes, see the "City Code Table".
To set the time and date
Seconds
Day
Operation Guide 3077
• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the "Reference" section.
Reverse
Upper Display Area
Main Display Area
Lower Display Area
World Time Mode
Press .
Day/Time Screen
Hour : Minutes Day of week
Press .
Day Seconds PM indicator
Hour : Minutes
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
City Code DST Hour
Month Year Minutes
• An icon appears momentarily on the display whenever you enter any mode besides
the Timekeeping Mode.
Alarm Mode Stopwatch Mode
3. When the setting you want to change is flashing, use D and B to change it as
described below.
Screen To do this:
Reset the seconds to
Change the city code
Toggle between Daylight Saving Time (
Day and Standard Time (
Change the hour or minutes
Change the year, month, or day
• See "Daylight Saving Time (DST)" for details about the DST setting.
4. Press A to exit the setting screen.
• Resetting the seconds to
Seconds
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to
• The year can be set in the range of 2000 to 2099.
• The watch's built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watch's battery replaced.
• The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
• A leading zero is added to dates from 1 through 9.
Example: The 1st of the month is displayed as 01.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from Standard
Time. Remember that not all countries or even local areas use Daylight Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
DST indicator
Countdown Timer Mode
)
)
while the current count is in the range of 30 to 59
without changing the minutes.
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C twice to display the DST setting screen.
3. Press D to toggle between Daylight Saving Time (
and Standard Time ( ).
4. Press A to exit the setting screen.
• The DST indicator is displayed on the Timekeeping
Mode and Alarm Mode screen while Daylight Saving
Time is turned on.
On/Off status
Edit Mode
Do this:
Press D.
Use D (east) and B (west).
Press D.
Use D (+) and B (–).
Use D (+) and B (–).
)
1