Brother BAS-416 User Manual
Maintenance schedule
Hide thumbs
Also See for BAS-416:
- Service manual (167 pages) ,
- Manual (7 pages) ,
- Supplementary manual (5 pages)
Advertisement
Quick Links
Website:
Clea nin g
Rotary hook
1. Open bobbin case cover and remove bobbin case.
Use brush to remove lint build up in and around
rotary hook. Compressed air may also be used.
2. Insert bobbin case in to rotary hook. Make sure
bobbin thread is not over 2 inches long. Close
bobbin case cover.
B
A
S
-
4
B
A
S
-
4
B
E
-
9
0
1
B
E
-
9
0
1
For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER
Email:
http://www.brother-usa.com/industembroidery/tech_down.aspx
Perform all maintenance with the machine OFF
Daily Maintenance
1
6
,
4
1
6
A
,
1
1
6
,
4
1
6
A
,
1
,
9
1
6
,
1
2
0
1
,
9
1
6
,
1
2
0
1
tsupport@brother.com
1. Rotate the pulley or degree wheel backwards so
that 50 degrees is at the top.
2. Open the bobbin case cover. Place a small drop of
oil on the raceway as indicated by the arrow. Oil
rotary hook every 3-4 hours of operation.
3. Close bobbin case cover.
4. Rotate pulley in the direction of the arrow or
forward to stop position, 100 degrees.
9/1/05
1
2
1
0
2
1
0
,
1
2
1
6
,
1
2
1
6
Oiling
Rotary hook
Advertisement
Related Manuals for Brother BAS-416
Summary of Contents for Brother BAS-416
-
Page 1: Daily Maintenance
For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Perform all maintenance with the machine OFF Clea nin g Rotary hook 1. Open bobbin case cover and remove bobbin case. Use brush to remove lint build up in and around rotary hook. -
Page 2: Weekly Maintenance
Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Needle Bars 1. Remove the front plate that has the “BROTHER” logo on it by removing one screw and loosening the other. The plate will now slide off to the side. 2. Oil each needle bar as shown in the picture by placing a small drop of oil on each needle bar in the two locations. -
Page 3: Monthly Maintenance
For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Knives 1. Remove the two screws and remove the needle plate. 2. Clean any thread and lint around the moving and fixed knive with a brush or compressed air 3. -
Page 4: 6 Month Maintenance
For Technical As sistance Please Call Toll Free 1-877-4BROTHER Website: http://www.brother-usa.com/industembroidery/tech_down.aspx Color Change Assembly 1. Color change the machine to the furthest needle to the left. Apply black grease (BR2) to the groove of the cam and bevel gears. Apply grease lightly since excess grease may contaminate the color change sensor on some models. - Page 5 For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER Email: tsupport@brother.com http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance Greasing 1. Push the pantograph slowly to the back. Apply white grease (30) to the two grooves of the linear rails on boththe left and right side of the machine.
- Page 6 For Technical Assistance Please Call Toll Fre e 1-877-4BROTHER Email: tsupport@brother.com http://www.brother-usa.com/industembroidery/tech_down.aspx 6 Month Maintenance 1. Remove the 8 screws holding on the cover and remove.