Haneco SKYLUX GEN II Installation Manual

HANECO LED HIGHBAY INSTALLATION GUIDE
Thanks for choosing our SKYLUX Generation II products.
We strongly recommend that you read this manual carefully before installation.
PRODUCT CODE
SKYLUX120W-G2
70/80/100/120W
SKYLUX200W-G2 130/150/170/200W
Product Dimension
ø300
Installation
2. Select desired power via dip switchable on the side.
3. Screw the eye bolt on top of the luminaire.
4. Install optional accessories and desired settings prior luminaire installation. (See table below for available accessories)
5. Install the luminaire onto desired location.
6. Connect power supply using the plug provided. Connect 0-10V dimmable cables to the dimming system if required.
SKYLUX GEN II
INPUT
POWER
RATING
100 – 240Va.c.
50/60Hz
SKYLUX-120W
For more information
www.haneco.com.au
1300 001 LED (533)
IK IP
PF
RATING RATING
>0.9 IK08 IP65
ø340
SKYLUX-200W
All dimensions are in mm
OPERATING NET
TEMPERATURE WEIGHT
2.65kg
-35 - 50°C
3.25kg