Grizzly T26691 Instructions

For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
Introduction
The Model T26691-92 provides a strong, air-tight,
water-tight seal using polyethylene or polypropyl-
ene plastic bags.
Specifications
Model
Power
Seal Length
Seal Width
Seal Thickness
Heating Time 0.2-1.5 (sec)
Dimensions
Weight
Inventory (
Figure 1
A. Heat Sealing Machine ............................... 1
B. Teflon Fabric Strips .................................... 2
C. Heating Elements ....................................... 2
A
Figure 1. Model T26691-92 inventory.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
T26691 T26692
400W 1000W
300mm 400mm
3mm 3mm
0.4mm 0.4mm
0.2-2.0 (sec)
3 ⁄ x 17 ⁄ x 3 ⁄ x 22
3 3 5
4 4 8
7 ⁄ in. 7 ⁄
1 1
16 16
10 lbs. 12 lbs.
)
B
COPYRIGHT © FEBRUARY 2015 BY GRIZZLY INDUSTRIAL, INC.
#MN17204 PRINTED IN CHINA
MODEL T26691-92
HEAT SEALING MACHINES
Operation
1.
Remove shipping brace, place sealer on level
surface, and plug into power supply.
2. Adjust dial (see Figure 2) according to thick-
ness and type of plastic bag.
Indicator
Light
Dial
⁄ x
1
16
in.
Figure 2. Model T26691-92 component
Qty
Note: Use a higher indicator setting for thick
material and a lower setting for thin material (see
Figure 3).
Indicator
Level
1
C
2
3
4
5
6
7
INSTRUCTIONS
identification.
Polyethylene
Under 0.06mm
Under 0.1mm
Under 0.14mm
Under 0.2mm
Figure 3. Material heating levels.
Arm
Teflon
Strip
Polypropylene
Under 0.03mm
Under 0.044mm
Under 0.044mm
Under 0.08mm