Summary of Contents for Makita Maktec MT066 Series
Page 1
ECHNICAL INFORMATION PRODUCT P 1 / 5 MT066, MT067 Models No. Description Cordless drills 10mm (3/8") ONCEPT AND MAIN APPLICATIONS Two 7.2V cordless drills with stick type battery have been added to maktec series models providing industrial performance and durability at less expense. MT067 Model MT066 features keyless drill chuck, and Model MT067 features keyed drilled chuck.
Page 2
P 2 / 5 epair < 1 > Lubrication Apply MAKITA grease N. No.2 (total 5.0g) to the teeth of the gears designated by black triangle in order to protect parts and product from unusual abrasion. See Fig. 1. Fig. 1...
Page 3
P 3 / 5 epair < 3 > Remounting drill chuck 1. Screw drill chuck until it is seated into the thread of spindle. 2. Hold hex wrench firmly with drill chuck, and hold the another end of hex wrench with vise. See Fig. 4. 3.
Page 4
P 4 / 5 epair 5. Set the fresh ball bearing 6200ZZ on the turn base of arbor press. Refer to Fig. 7. And press the spindle using arbor press to mount ball bearing 6200ZZ to where it was. And secure the ball bearing 6200ZZ with ring spring 9. Refer to Fig. 6. 6.
P 5 / 5 ircuit diagram DC motor Red point mark Lead wire (red) Lead wire (black) Switch iring diagram Connect the lead wires to the terminals of DC motor as illustrated in Fig. 9. Fig. 9 Lead wire (red) Red point mark Lead wire (black) DC motor...
This manual is also suitable for:
Maktec mt067 seriesMaktec mt066skMaktec mt066sk2Maktec mt066sk3Maktec mt067skMaktec mt067sk2...
Show all