Download Print this page
Zanussi ZF-1616C Instruction Manual

Zanussi ZF-1616C Instruction Manual

16”metal stand fan

Advertisement

Quick Links

16"METAL STAND FAN
ITEM NO. : ZF-1616C/1616W
Instruction Manual
Please keep for future reference
Thank you for purchasing 16" Metal Stand Fan

SAFETY GUIDELINES

1. Read the instructions carefully since they give important indications
concerning safety guidelines, assembly, operation, cleaning and care.
2. Check the condition of the appliance after removing from the packaging.
Ensure that all component parts of the fan are within the packaging and
have not been damaged.
3. Never leave any parts of the packing within reach of children.
4. This appliance must only be used for the purpose for which it was designed
i.e. for room ventilation. DO NOT USE IN BATHROOMS.
5. Never insert objects into the grille of the fan.
6. Never touch the appliance with wet or damp hands.
7. Never pull the cable or the appliance itself in order to disconnect the plug
from the socket.
8. Before carrying out any cleaning or servicing operation always remove the
plug from the socket.
9. In the event of appliance failing to operate, all repairing work must be
undertaken by a qualified engineer.
10. If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
11. Ensure that the fan is switched off from the supply mains before removing
the guard.
12.
The appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction.
Warning : Never use without the guards in place!

Advertisement

loading

Summary of Contents for Zanussi ZF-1616C

  • Page 1 2. Check the condition of the appliance after removing from the packaging. Ensure that all component parts of the fan are within the packaging and ITEM NO. : ZF-1616C/1616W have not been damaged. 3. Never leave any parts of the packing within reach of children.
  • Page 2 ASSEMBLY ● Carefully unpack the appliance and remove all the packaging materials attached to your Fan. Pick out the base (15) and the pole sets (12~14), remove the pole fixing nut (16) from the Main pillar (14) and insert the Main pillar into the hole of the Base then tighten the Pole fixing nut (16).
  • Page 3 The airflow can be adjusted upward or downward by simply moving the TECHNICAL SPECIFICATIONS Motor housing (9) up or down. Item No. : ZF-1616C/1616W Voltage : AC 220-240V~ 50Hz Warning : Never touch the Blade with your hand or any other objects...

This manual is also suitable for:

Zf-1616w