Summary of Contents for Honeywell Ex-Or MS2021PHBF
Page 1
MS2021PHBF / MS2021PHBSM Hi-Bay Multi-Function Dual Output LightSpot with photocell MS2021PHBF MS2021PHBSM Installation and Commissioning Instructions Note: HP2000 required for commissioning User override available via the HC7 and HC8 (dedicated) and HC5 (general purpose) Hand-held Infrared Controllers...
Page 2
Hi-Bay Multi-Function Dual Output LightSpot with photocell The Hi-Bay Multi-Function Dual Output LightSpot is a high performance presence detector with photocell. In all operating modes, for one of the two outputs, the photocell can hold lights off as a vacant area becomes occupied, and if the light level falls too low during the period of occupancy, switch the lights on.
Page 3
Programmable Parameters Power Up: ON/OFF Set to ON the detector will automatically switch both outputs on when Mains is applied. If set to OFF, the detector will power up without turning its outputs on, wait 30 seconds and then look for occupancy. Only if the area is occupied will the outputs switch on at this time.
Page 4
Haydock Lane, Haydock, Merseyside WA11 9UJ suitable recycling centre. Tel: +44 (0)1942 719229 Do not dispose of with normal household waste. Fax: +44 (0)1942 508753 Do not burn. Email: technicalsales.ex-or@honeywell.com W4425E www.ex-or.com...