Lafayette Heartland Woods Woodland Harvest Series Installation Instructions

Thank you for purchasing Lafayette wood blinds with Achieva Lift system. With proper
installation and care, your new blinds will provide many years of beauty and performance.
Tools and Fasteners Needed
Power Drill, 1/4" Driver and drill bits
Tape Measure
Flat blade Screwdriver
Phillips Screwdriver
Pencil
Level
Spacer
Installation Bracket
MOUNT THE BRACKETS
The brackets are designed for inside or
outside mount installations. Brackets
should be placed no further than 2" in
from each end of the headrail. If more
than two brackets are required, space
at equal intervals. Use two screws per
bracket.
If spacers are being used, line the
holes up with the installation bracket
first.
If extension brackets are being used,
install those first and then attach the
installation bracket with pan head nut &
bolts provided.
MOUNT THE HEADRAIL
First lower the blind about 1 inch below the headrail. This will keep the slats from getting in the way of the installation.
Position the headrail with the back (A) resting on both bottom prongs of the bracket. Push the front of the ehadrail-
firmly upward and toward the windowuntil the groove at the top of the headrail snaps into place, (B) as shown.
A I
CHIEVA NSTALLATION
Short
Long
Extender
Extender
Nut & Bolt
I
NSTRUCTIONS
Mounting Surface
Wood
Drywall, Plaster
Metal
Shade Width
Up to
48 5/16" - 72 3/8"
72 11/16" - 96"
Make sure all brackets are level with each other.
Shim if necessary
Fastener
#6 Hex Head
Provided
Wall Anchors
Not Provided
Sheet Metal
Not Provided
Brackets Required
48 1/4"
2
3
4
Release tab is always
the top of the bracket.