Advertisement
Quick Links
KC2S(AKC2)/KE2S(AKE2)
Eco-COUNT METER and Eco-HOUR METER are ideal for maintenance
of your facilities and machinery.
Eco-COUNT METER
Eco-HOUR METER
Dedicated CT
Compliance with RoHS Directive
PRODUCT TYPES
1. KC2S Eco-COUNT METER
Product Name
Eco-COUNT METER main unit*
1
Intermediate power cable*
3
Notes: 1. Eco-COUNT METER (AKC2421/AKC2621) is a product package consisting of the main unit, a dedicated current transformer (CT), and trunk cable.
2. Only the installation frame installation type includes rubber gasket and installation frame.
3. The maximum allowable current of the intermediate power cable is 15 A.
2. KE2S Eco-HOUR METER
Product Name
Eco-HOUR METER main unit*
1
Intermediate power cable*
3
Notes: 1. Eco-HOUR METER (AKE2421/AKE2621) is a product package consisting of the main unit, an exclusive use current transformer (CT), and trunk cable.
2. Only the installation frame type includes rubber gasket and installation frame.
3. The maximum allowable current of the intermediate power cable is 15 A.
SPECIFICATIONS
Item
Product name
Part No.
No. of digits
External power supply
Counting max. speed
Time accuracy
Measurement range
Detection sensitivity (through current)
Min. input signal width
Reset input
Input method (signal)
Display method
Breakdown voltage (initial)
Insulation resistance (initial)
Protective construction*
2
Vibration resistance (Functional)
Vibration resistance (Destructive)
Shock resistance (Functional)
Shock resistance (Destructive)
Operating temperature
Storage temperature
Ambient humidity
Battery life*
3
Mass (weight)
Notes: 1. Maximum cable diameter is 10 mm.
2. See page 13, "NOTES 4. Waterproofing Construction" for details about the protective
construction (IP66).
POWER-ON COUNTER
POWER-ON HOUR METER
FEATURES
1. Easy to install on existing machinery
Just attach the dedicated CT to your existing
cables. There is no need to install any
additional cabling.
2. Built-in battery
The built-in battery allows the units to be
installed anywhere.
3. Economically priced
4. Compact size doesn't take up space
(DIN 24 x 48)
Easy to install even in cramped spaces.
Installation type
Installation frame type*
2
One-touch installation type
Installation type
Installation frame type*
2
One-touch installation type
Eco-COUNT METER (Power-on Counter)
AKC2421/AKC2621
8 digits
2Hz (CT through current minimum power-up time: 250ms, ON:OFF =1:1)
—
0 to 99999999 counts
Counting start: 0.5A to 80A (50/60Hz)*
Counting stop: 0.2A (50/60Hz) or less
Between live and dead metal parts: Min. 100MΩ (measured at 500 V DC)
10 to 55 Hz: 1 cycle/min., signal amplitude of 0.15mm
10 to 55 Hz: 1 cycle/min., signal amplitude of 0.375mm
7 years (at 25°C 77°F)
Approx. 110g (Dedicated CT included)
Front reset
Available
—
Front reset
Available
—
Specifications
Not required (built-in battery)
1
100ms
• Non voltage input using contacts or open collector connection
• Input impedance, When shorted: Max.10kΩ, When open: Min.750kΩ
• Residual voltage: Max. 0.5V
7-segment LCD
Between live and dead metal parts: 1,000V AC for 1 minute.
IEC Standard IP66 (only front panel with rubber gasket)
Min. 98m 321.522ft/s
(4 times on 3 axes)
2
Min. 294m 964.567ft/s
2
(5 times on 3 axes)
–10 to +50°C
+14 to +122°F
(without frost or dew)
–25 to +65°C
–13 to +149°F
(without frost or dew)
35 to 85% RH (at 20°C non-condensing)
3. Battery life is calculated based on the above conditions.
This is not a guarantee of actual battery life.
Please use this as a guide for replacing the battery only.
The actual battery life may be shortened, depending on the utilization environment of
the main unit.
26/03/2013
KC2S Eco-COUNT METER
KE2S Eco-HOUR METER
5. Two installation methods available
(Separate models)
Two installation methods are available: The
extremely easy-to-use one-touch installation,
and the installation frame installation, used for
timers/counters (protective construction IP66).
Select the installation type that suits the
location.
6. Letter's height is 8.7 mm
A large LCD panel is used, with a highly
legible 8.7 mm letter's height.
7. Conform to CE marking (EMC directive)
Measurement count range
0 to 99999999
Measurement time range
0 to 99999.9h
Eco-HOUR METER (Power-on Hour Meter)
AKE2421/AKE2621
6 digits
—
±100ppm (25°C)
0 to 99999.9h
Timing start: 0.5A to 80A (50/60Hz)*
Timing stop: 0.2A (50/60Hz) or less
.006inch
(10 min. on 3 axes)
.015inch
(1 hr. on 3 axes)
10 years (at 25°C 77°F)
Approx. 105g (Dedicated CT included)
Part No.
AKC2421
AKC2621
AKE2811
Part No.
AKE2421
AKE2621
AKE2811
1
Advertisement
Related Manuals for Panasonic KC2S Eco-COUNT METER
Summary of Contents for Panasonic KC2S Eco-COUNT METER
- Page 1 Easy to install even in cramped spaces. legible 8.7 mm letter’s height. 7. Conform to CE marking (EMC directive) Compliance with RoHS Directive PRODUCT TYPES 1. KC2S Eco-COUNT METER Product Name Installation type Front reset Measurement count range Part No.
-
Page 2: Applicable Standards
KC2S(AKC2)/KE2S(AKE2) 2. Dedicated CT Item Specification Diameter of conductor to be measured 10 dia. (max.) Breakdown voltage (Initial value) 1,000 Vrms AC for 1min: Between core and output connector terminal Insulation resistance (Initial value) Min. 100MΩ: Between core and output terminal (at 500V DC) Allowable number of detachments/attachments Approx. -
Page 3: Installation
Note: We recommend using an intermediate power cable when attaching the dedicated CT to a non-“Y” split power cable EXPLANATION OF OPERATION KC2S Eco-COUNT METER 3. When the reset terminal input is set to 4. Use the reset key on the front of the unit 1. -
Page 4: Reset Input
KC2S(AKC2)/KE2S(AKE2) KE2S Eco-HOUR METER 1. The power-on time is measured when the Power on detection of dedicated CT detects a through current. dedicated CT 2. When the elapsed time (number of hours measured) reaches the full scale, the Reset input display reverts to 0, and starts timing again from 0. - Page 5 KC2S(AKC2)/KE2S(AKE2) 6. Cautions regarding battery replacement • Installation frame type 1) Remove wiring before replacing the battery. You may be electrocuted if you come into contact to a part where high voltage is applied. 2) Make sure you are not carrying a static electric charge when replacing the battery.