Page 1
INSTALLATION INSTRUCTIONS ROCK LIGHT KIT *THESE INSTRUCTIONS ARE FOR THE FOLLOWING LIGHTS: A-SERIES ROCK LIGHT KIT (4 or 6 lights) IMPORTANT THANK YOU FOR PURCHASING RIGID INDUSTRIES’ PRODUCTS FOR YOUR VEHICLE. Please read through all of these Instructions and tips before proceeding with the installation. We do our best to provide a simple installation process for all applications however a professional installation is always recommended.
Page 2
HARNESS/SWITCH WIRING INSTRUCTIONS **Disconnect negative battery teminal before starting your installation** **While routing wire always avoid any heat sources, sharp edges or abrasive surfaces.** 1. Mount red and black posts in desired location using provided self-tapping screws or nuts & bolts. 2.