Panasonic DMP-BD60 Installation Manual

Icos hd multi region chip

Hide thumbs Also See for DMP-BD60:

Download this manual

HD-MOD DMP-BD60/80 NB

Panasonic DMP-BD60/80

Installation Manual

Please note that this modification to your player invalidates any warranty that

may already exist on your player.

Introduction

Installing this modification is difficult. It requires soldering on to some very small components on

the mainboard.

You will require a

 Fine tip soldering iron (max 25 watt)

 Solder flux etc.

 Some lengths of thin wire

 Philips screwdriver

 Double sided tape.

General information

The installation of the ICOS HD Multi region chip is difficult. If you are not experienced with

soldering, please let us install the kit for you.

This modification is done entirely at your own risk. We do NOT accept any liability in the

event of damage to your BD-player in the process of installation of the chip or in the usage

of the modification.

If you have never used a soldering iron or are not competent with it, please do not attempt

to perform this modification.

We recommend you read this manual completely before installing this modification.

Page 1 HD-MOD DMP-BD60/80 NB Panasonic DMP-BD60/80 Installation Manual Please note that this modification to your player invalidates any warranty that may already exist on your player. Introduction Installing this modification is difficult. It requires soldering on to some very small components on the mainboard.
Page 2 HD-MOD DMP-BD60/80 NB Opening your player First make sure that your player is disconnected from the mains before you even start opening the player. If you set the unit in front of you with the display towards you there are 3 screws at the back of the player.

Dmp-bd6080