Sealey API1500 Quick Start Manual

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
wARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
‰
workbench.
wARNING! Use workbench on level and solid ground, preferably concrete. Avoid tarmacadam since the workbench may sink into the
‰
surface.
Locate workbench in a suitable working area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
9
Keep the workbench clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the working area.
9
DO NOT use the workbench for any purpose other than that for which it is designed.
8
DO NOT undertake work on the workbench without the workpiece being adequately secured. Use clamps or a vice (not included) to secure
8
the workpiece. Available from your Sealey stockist.
DO NOT use the workbench out of doors.
8
DO NOT get the workbench wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT clean the workbench with any solvents which may damage the work surface or the painted surfaces.
8
Note! The assembly of this product will require assistance.
2. INTRODUCTION
manufactured from heavy gauge steel, these benches are the top end of our range with a weight capacity of 1000kg (evenly distributed). Fitted
with adjustable feet to ensure work surface is level, even if your floor is not. 40mm Thick laminate worktop is edged with double thick trim.
Optional drawer units, vice support or back panels easily attach converting the workbench into a workstation.
3. SPECIFICATION
model no .................................................................. API1500
Size (W x D x H)....................................1500 x 750 x 850mm
Weight ......................................................................... 56.9kg
model no .................................................................. API1800
Size (W x D x H)....................................1800 x 750 x 850mm
Weight ....................................................................... 66.68kg
model no .................................................................. API2100
Size (W x D x H)....................................2100 x 750 x 850mm
Weight ......................................................................... 80.2kg
4. CONTENTS
4.1. Refer to fig.1
© Jack Sealey Limited
wORKBENCHES STEEL INDUSTRIAL
1.5M/1.8M/2.1M
API1500, API1800, API2100
mODEL NO'S:
fig.1
Original Language Version
API1500, API1800, API2100| Issue:2 (H3F) 20/03/19