Advertisement
Quick Links
Assembly Instructions
VX-5
PX-5
Watch the assembly video on line before
assembling. It makes the assembly
much easier!!
VX-5 & VX-7 Components:
(VX-7 & PX-7 Model) 5 sections of the circle, 4
having white heat shrink on them and one being solid
black.
(VX-5 & PX-5 Model) 4 sections of the circle, each
having white heat shrink on them.
Base Assembly: 4 pieces numbered
2 pieces of white cable
1 piece of black cable with ring attached
1 black safety net with drawstring
8-12 nuts & bolts for bolting the frame together. (1"x
¼")
1 nut and bolt for base assembly (5/16")
2 Washers (5/16")
1 double sand bags for stability 9 lbs.
Visual Aid (V-Card) for Strike Zone Illustration
& VX-7
& PX-7
1
Advertisement
Summary of Contents for V-Flex VX-5
-
Page 1: Assembly Instructions
(VX-7 & PX-7 Model) 5 sections of the circle, 4 having white heat shrink on them and one being solid black. (VX-5 & PX-5 Model) 4 sections of the circle, each having white heat shrink on them. Base Assembly: 4 pieces numbered ... -
Page 2: Base Assembly
Base Assembly There are (4) parts to the base. Each is numbered and color coded. Place the 5/16” washer on the bolt that goes through the center of each piece. Invert the frame during the assembly so the bolt is facing upward. Take #1 and place #2, #3 and #4 onto the center bolt. - Page 3 Insert the bungee cord through the tube net and place both over the frame before completing the basic frame assembly. Note: The PX-5, VX-5 and the PX-7, VX-7 have the exact same base but vary in the number of frame pieces. All parts are color coded for easy assembly.
- Page 4 The black mark on each cable represents our suggested height of the ring during front toss training. *Always place the tube side away from the batter to prevent damage to the tube. Thank you for choosing V-Flex…...