Honeywell 2040W Operation And Installation Manual

Opening & Closing Your Firesafe
Opening Your Honeywell Safe
1. Insert the key and turn left.
2. Push the large button and the locking
latch will open and spring forward.
3. Once the latch has cleared the lip it was
secured to, you can open the Firesafe lid.
4. Remove the interior top tray.
Closing Your Honeywell Safe
1. Install the interior top tray. The safe will not
function properly during a fire if the tray is not
installed. Do not place media you want to
protect on top of the tray.
2. Flip the lock assembly up and over the clasp.
3. Press the bar down to lock the clasp.
4. Insert the key and turn right.
5. Remove the key.
Assembling Wheels
(Model 2040W only)
If your safe includes Easy Roller™ Wheels, follow the assembly
instructions included in the box. For your safety, the Maximum
Weight Warning printed on the wheel cart should be upright and
facing outward.
After assembly, carefully place the safe onto the wheel cart.
Do not sit or stand on the Easy Roller™ Wheels. The maximum
weight supported is 85 lbs (38.6 kg).
home and office Security Safes
Limited Warranty
LIFETIME AFTER FIRE REPLACEMENT GUARANTEE
If your Honeywell Firesafe is ever damaged by a fire, SISCO will replace it
with a comparable model at no charge to the consumer. A photo of the
damaged safe and a Fire Department report will be required as proof of
loss. Freight on the replacement unit is not included in the guarantee and
must be paid by the user.
LIMITED WARRANTY
If your Honeywell safe fails to operate because of a manufacturing defect,
any time up to five (5) years from the date of original purchase, we will, at
our discretion, repair or replace the unit at no charge to the original owner
provided you return the product, shipping prepaid, to SISCO, or to a service
center or locksmith of our choice. Prior authorization must be obtained
from Sisco in advance.
WHAT IS NOT COVERED
This warranty does not apply if the product has been damaged by
improper installation, neglect, accident, misuse, exposure to extremes
of heat or humidity, terrorism, war, acts of God, or as a result of service
or modification by other than an authorized service center. Sisco is not
responsible for any costs associated with removing or installing this
product. SISCO is also not responsible for damage or loss of the contents of
the safe nor for the unauthorized removal of contents.
This warranty does not apply to the finish of any metal portions of the
product. No other expressed warranty is given. The repair or replacement
of the product is your exclusive remedy. Any implied warranty of salability
or fitness is limited to the duration of this written warranty. Some states
do not allow limitations on how long an implied warranty lasts, so the
above limitations may not apply to you. In no event shall SISCO be liable
for consequential or incidental damages. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you
specific rights and you may also have other rights which vary from state to
state.
The Honeywell trademark for Home/ Office Safes is used with permission.
Honeywell Safes are distributed exclusively by SISCO. Honeywell makes no
representations or warranties with respect to this product or service, The
Honeywell Trademark is used under license from Honeywell Intellectual
Properties Inc. by SISCO.
home and office Security Safes
Operation & Installation Guide
2040 / 2040W
Model
2040E / 2040WE
Model
The Media
The Media
ProTecTor
ProTecTor
with Key Lock
read These instructions Very carefully!
HME-HMS-MDE
ENGLISH
TM
TM