Advertisement
Quick Links
DSR-7403 INSTALLATION INSTRUCTIONS
The following instructions are for installation and authorization of an ARRIS DSR-7403 to receive HBO
and Cinemax services from Galaxy 14, Transponders 8 and 16 and Galaxy 15 transponder 19.
The DSR-7403 is designed for simple setup requiring only one (1) menu screen in the user interface, with
all other configurations completed by HBO's satellite broadcast control system, upon authorization.
Follow the six (6) high-level steps below to setup your receiver and acquire the desired signal(s).
Steps
1. Rack mount the unit.
2. Connect two RF satellite inputs.
3. Connect ASI output(s).
4. Connect AC power.
5. Enter frequency and modulation parameters in the Quick Install menu, to gain Signal lock.
6. Contact HBO's technical assistance and authorization hotline at 212.512.5666 to request unit
authorization.
Information is also provided on how to order a spare DSR-7403 unit to backup your production receiver.
The DSR-7403 user manual can be downloaded through the unit's web interface using a PC connection
for additional operating instructions.
Advertisement
Related Manuals for Arris DSR-7403
Summary of Contents for Arris DSR-7403
- Page 1 Cinemax services from Galaxy 14, Transponders 8 and 16 and Galaxy 15 transponder 19. The DSR-7403 is designed for simple setup requiring only one (1) menu screen in the user interface, with all other configurations completed by HBO’s satellite broadcast control system, upon authorization.
- Page 2 1. Rack Mount the DSR-7403 The DSR-7403 unit, with the supplied mounting brackets is designed for installation in an EIA standard 19-inch (480 mm) equipment rack. Place the unit in a stable and level position within the rack and ensure that all front rack-ear mounting screws are fully tightened, to support the unit with no possible motion as connections are made and initial programming occurs.
-
Page 3: Connect To Ac Power
4. Connect to AC power When connected to AC power the unit takes about 90 seconds to boot up. When the unit has fully booted the main menu will appear. DSR-7403 Front Panel Control Buttons Copyright 2017 – ARRIS Enterprises Inc. All rights reserved. - Page 4 In a moment the Signal light will turn green indicating that the satellite signal has been acquired. If you are unable to acquire a signal call ARRIS Technical Support at 888.944.4357 for assistance. Copyright 2017 – ARRIS Enterprises Inc. All rights reserved.
- Page 5 When the unit receives the authorization message, the Authorized light will turn green. Connection to Headend Network Once authorization is complete your DSR-7403 will be remotely configured by uplink messaging for all desired services and can be connected to the head end distribution network.
- Page 6 Any receivers you have been using to receive these services will no longer be functional as either primary or backup units for the MPEG-4 services. The only viable receivers to use as shelf-spares for backing up the MPEG-4 services is the DSR-7403 (12 services) or DSR-7403 (3 services) transcoders.