LARZEP hydraulic tools are designed in accordance with internal quality standards, in compliance with the ISO 9001 regulation. The tools are designed for the applications described in this manual. Any other use may pose a risk to the equipment and result in hazardous situations for the operator.
Page 3
CHANGING THE BLADE. Model CN0024: Release two Allen M5x15 (51) screws, remove the blade and replace it with a new one and attach it by tightening the screw (22) once again. Model CN0324: Release the pin (5), unscrew the head (3) and remove the blade using the screw (17).
Page 4
Instruction Manual Nut-Splitter “CN0024” 7. DECLARATION OF CONFORMITY...