Tansun Quartzheat RIV ELITE 060 Reference Manual

Riviera elite series

Download this manual

Enlarged version

Fig. E

7. Remove the screw (Fig. F) from the side reflector and lift it up away from the heater to remove it. Repeat at opposite end to remove

other side reflector.

8. The lamp wires should be pulled out of the side slots and the lamp can be lifted up completely (Fig. G). The wires should be gently

pulled so they come out from behind the reflector.

Fig. G

9. The lamp should now be removed from the heater as shown in Fig. H.

10. Refit the new lamp in reverse order ensuring that no wires get trapped and all screws are fully tightened.

F o l l o w i n g i n f o r m a t i o n i s o n l y f o r E U - m e m b e r s t a t e s :

The use of this symbol indicates that this product may not be treated as household waste. By ensuring this product

is disposed of correctly, you will help prevent potential negative consequences for the environment and human

health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed

information about recycling of this product, please contact your local council, your household waste disposal service

or the shop where you purchased the product.

Part No. 043099

Issue. 1

Riviera Elite

Fig. F

Fig. H

Reference Manual

Spectrum House, Unit 1, Ridgacre Road, West Bromwich,

West Midlands, B71 1BW, England.

Tel: +44 (0)121 580 6200 - Fax: +44 (0)121 580 6222

Email: quartzinfo@tansun.com - Website: www.tansun.com

Page 1 Reference Manual Riviera Elite Fig. E Fig. F 7. Remove the screw (Fig. F) from the side reflector and lift it up away from the heater to remove it. Repeat at opposite end to remove other side reflector. 8. The lamp wires should be pulled out of the side slots and the lamp can be lifted up completely (Fig. G). The wires should be gently pulled so they come out from behind the reflector.
Page 2 Introduction Maintenance The Riviera Elite outdoor heater produces radiant heat like the sun, warming people and objects and not the air in between, providing In the event of heater failure, or for spare parts or advice, please contact the manufacturer in the first instance. the only form of heat that will not blow out or away.
Page 3 5. Feeding the cable through the heater assembly, pass the cable through the M25 cable gland and through the terminal box. Locate Kit Contents the heater assembly onto the joining pieces of the body pole assembly. Secure in place with 3 X M8 x 20 button head socket screws, placing M8 spring washers behind the heads of the screws.
Page 4 3. Slide a body pole (with joining pieces fitted) onto the three upright pieces on the base plate by matching the flat faces on the tube Installation Instructions with the flat faces of the upright piece, feeding the cable through. Secure in place with 3 X M8 x 20 button head socket screws placing a M8 spring washer behind the head of the screw on all faces.

Riv elite 045