NETGEAR FS605 v3 Installation Manual

10/100 mbps

Hide thumbs Also See for FS605 v3:

Enlarged version

Technical Support

PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH

YOUR PRODUCT.

By registering your product at www.NETGEAR.com/register, we can provide you with faster

expert technical support and timely notices of product and software upgrades.

NETGEAR, INC.

Support Information

Phone: 1-888-NETGEAR (For US & Canada only) - 24 x7 phone support

See Support Information card for other countries.

E-mail: support@NETGEAR.com (24 x 7 online support)

www.NETGEAR.com

Everybody's Connecting are trademarks or registered trademarks of Netgear, Inc. in the

United States and/or other countries. Microsoft and Windows are registered trademarks of

Microsoft Corporation in the United States and/or other countries. Other brand and product

names are trademarks or registered trademarks of their respective holders. Information is

2 0 1 - 1 0 7 4 9 - 0 1

February 2006

Fast Ethernet Switch

FS605 v3 / FS608 v3

10/100 Mbps

Table of Contents

Page 1: Technical Support
E-mail: support@NETGEAR.com (24 x 7 online support) www.NETGEAR.com © 2006 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy, Auto Uplink and Everybody's Connecting are trademarks or registered trademarks of Netgear, Inc. in the United States and/or other countries. Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
Page 2: Installation Overview
EN 55 022 Declaration of Conformance This is to certify that the NETGEAR Model FS605 v3 / FS608 v3 Fast Ethernet Switch is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a.
Page 3: Prepare To Install
If you’re missing the Technical Support information card itself, get contact information at www.NETGEAR.com in the Customer Service area. Decide where you want to place the switch. Find a flat horizontal surface — such as a table, desk or shelf.
Page 4: Install Switch/Connect Other Devices
If the socket is controlled by a light switch, make sure the switch is in the on position. Make sure you are using the NETGEAR power adapter supplied with your switch. Make sure the cable connectors are securely plugged in at the switch and the device.

Fs608 v3Fs605 - switchFs605na