Sony CMT-SBT100 Operating Instructions

4-464-274-13 (2)
Home Audio System
Operating Instructions
GB
©2013 Sony Corporation Printed in China
CMT-SBT100/SBT100B
For customers in Europe and Australia
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
WARNING
collection systems)
This symbol on the product or on its packaging
To reduce the risk of fire, do not cover the
indicates that this product shall not be treated as
ventilation opening of the appliance with
household waste. Instead it shall be handed over
newspapers, tablecloths, curtains, etc.
to the applicable collection point for the recycling
Do not expose the appliance to naked flame
of electrical and electronic equipment. By
sources (for example, lighted candles). ensuring this product is disposed of correctly, you
will help prevent potential negative consequences
To reduce the risk of fire or electric shock, do not
for the environment and human health, which
expose this appliance to dripping or splashing,
could otherwise be caused by inappropriate
and do not place objects filled with liquids, such
waste handling of this product. The recycling of
as vases, on the appliance.
materials will help to conserve natural resources.
Do not install the appliance in a confined space, For more detailed information about recycling of
this product, please contact your local Civic Office,
such as a bookcase or built-in cabinet.
your household waste disposal service or the
As the main plug is used to disconnect the unit
shop where you purchased the product.
from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an
Europe Only
abnormality in the unit, disconnect the main plug Disposal of waste batteries
from the AC outlet immediately.
(applicable in the European
Do not expose batteries or appliances with Union and other European
battery-installed to excessive heat, such as
countries with separate
sunshine and fire.
collection systems)
The unit is not disconnected from the mains as
This symbol on the battery or on the packaging
long as it is connected to the AC outlet, even if the
indicates that the battery provided with this
unit itself has been turned off.
product shall not be treated as household waste.
On certain batteries this symbol might be used
Excessive sound pressure from earphones and
headphones can cause hearing loss. in combination with a chemical symbol. The
chemical symbols for mercury (Hg) or lead (Pb)
This equipment has been tested and found to
are added if the battery contains more than
comply with the limits set out in the EMC Directive
0.0005% mercury or 0.004% lead.
using a connection cable shorter than 3 meters.
By ensuring these batteries are disposed of
CAUTION
correctly, you will help prevent potentially
negative consequences for the environment and
The use of optical instruments with this product
will increase eye hazard. human health which could otherwise be caused
by inappropriate waste handling of the battery.
This appliance is
The recycling of the materials will help to conserve
classified as a CLASS
natural resources.
1 LASER product. This
In case of products that for safety, performance
marking is located on
or data integrity reasons require a permanent
the rear exterior of the
connection with an incorporated battery, this
unit.
battery should be replaced by qualified service
staff only. To ensure that the battery will be
For customers in Australia
treated properly, hand over the product at end-
This equipment should be installed and operated of-life to the applicable collection point for the
with at least 20 cm and more between the recycling of electrical and electronic equipment.
radiator and person's body (excluding extremities: For all other batteries, please view the section
hands, wrists, feet and ankles). on how to remove the battery from the product
safely. Hand the battery over to the applicable
For customers in Europe
collection point for the recycling of waste
Properly shielded and grounded cables and
batteries.
connectors must be used for connection to host
For more detailed information about recycling of
computers and/or peripherals. this product or battery, please contact your local
Civic Office, your household waste disposal service
Notice for customers: the following
or the shop where you purchased the product.
information is only applicable to
equipment sold in countries applying
EU directives.
This product has been manufactured by or on
behalf of Sony Corporation, 1-7-1 Konan Minato-
ku Tokyo, 108-0075 Japan. Inquiries related to
product compliance based on European Union
legislation shall be addressed to the authorized
representative, Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters, please refer
to the addresses provided in the separate service
or guarantee documents.
Hereby, Sony Corp., declares that this equipment
is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/
EC.
For details, please access the following URL:
http://www.compliance.sony.de/
Note on DualDiscs
Location of Controls
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side. However, Unit (Front)
since the audio material side does not conform to
the Compact Disc (CD) standard, playback on this
product is not guaranteed.
Music discs encoded with copyright
protection technologies
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware
that among those discs, there are some that do
not conform to the CD standard and may not be
playable by this product.
License and Trademark Notice
ˎWindows Media is either a registered trademark
Tip
or trademark of Microsoft Corporation in the
When you use headphones, connect to  (headphone) jack .
United States and/or other countries.
ˎMPEG Layer-3 audio coding technology and Remote
patents licensed from Fraunhofer IIS and
Thomson.
ˎThe BLUETOOTH® word mark and logos are
registered trademarks owned by BLUETOOTH
SIG, Inc. and any use of such marks by Sony
Corporation is under license. Other trademarks
and trade names are those of their respective
owners.
ˎThe N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the United States
and in other countries.
ˎAndroid is a trademark of Google Inc.
ˎThis product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
ˎThe system names and product names indicated
in this manual are generally the trademarks or
registered trademarks of the manufacturer. ™
and ® marks are omitted in this manual.
Getting Started
Rear of the speaker
red 
 Power input (AC IN)
After all equipments are connected, connect the
power cord  to the wall outlet.
 Speakers (left/right) connectors
Firmly connect the right speaker cord  to R, and
the left speaker cord  to L.
 AUDIO IN (external input) jack
Connect optional external equipment with an
audio connecting cable (not supplied).
 Antennas
 AM loop antenna (supplied) (CMT-SBT100 only)
 FM lead antenna (supplied) (CMT-SBT100 only)
 DAB/FM lead antenna (supplied) (CMT-
SBT100B only)
Find a location and an orientation that provide
good reception, and then fix the antennas to a
stable surface (window, wall, etc.).
Keep the antennas away from the unit, power
cord and other AV components to avoid picking
noise.
Secure the end of the FM lead antenna with
adhesive tape.
To prepare the AM loop antenna
Rewind an Stand the
antenna cord antenna and
wound around the secure it to the
antenna and raise slit until it clicks.
the antenna stand.
Operations
Playing a CD-DA/MP3 disc
1 Press CD FUNCTION  on the remote or press
FUNCTION  on the unit repeatedly until "CD"
appears in the display .
2 Press the  (open/close) button  to open
the disc tray .
3
Load a disc with the label side facing up.
Label side
(printed side)
This manual mainly explains operations using
the remote, but the same operations can also be
performed using the buttons on the unit having
 (open/close) 
the same or similar names.
4 Press the  (open/close) button  to close
To use the remote
the disc tray .
Slide and remove the battery compartment lid,
5
and insert the two supplied R6 (size AA) batteries, Press  (play/pause) button .
 side first, matching the polarities shown below.
Playback starts.
Notes
ˎIf you cannot remove the disc and "LOCKED" appears in the
display , contact your nearest Sony dealer.
ˎDo not load a disc with non-standard shapes (e.g., heart,
square, star). Doing this may cause irreparable damage to
the system.
ˎDo not use a disc with tape, stickers or paste on it as this
may cause malfunction.
ˎWhen you remove a disc, do not touch the surface of the
Notes on using the remote
disc.
ˎWith normal use, the batteries should last for about 6
months. Other operations
ˎDo not mix an old battery with a new one or mix different
types of batteries.
To Do the following:
ˎIf you do not use the remote for a long period of time,
remove the batteries to avoid damage from battery leakage Pause playback Press   . To resume play,
and corrosion.
press the button again.
Stop playback Press  
.
Select a track
Press /  .
or file
Find a point in a Hold down / 
(or
track or file
/  on the unit)
during playback, and release
the button at the desired point.
Select Repeat
Press REPEAT  repeatedly
Play until " " (all tracks of files)
or " 1" (single track or file)
appears.
Select a folder on Press +/   repeatedly.
an MP3 disc
Remove a disc
Press   on the unit.
To change the play mode
Press PLAY MODE  repeatedly while the player
is stopped. You can select Normal Play mode (no
indication or "FLDR"* appears), Shuffle Play mode
("SHUF" or "FLDR SHUF"* appears), or Program
Play mode ("PGM" appears).
Play mode
* When "FLDR" or "FLDR SHUF" appears, all the files in the
selected folder on the MP3 disc will be played. When
playing a CD-DA disc, the system performs the same
operation as Normal Play (no indication) or Shuffle Play
"SHUF."
Setting the clock
When "PUSH STOP" appears
1 Press  
to turn on the system.
You cannot change the play mode during
2 Press TIMER MENU  to select the clock set
playback. Stop playback then change the play
mode.
mode.
If "PLAY SET" flashes, press / 
repeatedly
Note on the play mode
to select "CLOCK," and then press (enter)  .
If the power cord is disconnected when the
3
Press /  repeatedly to set the hour, then
system is on, the play mode returns to Normal

press (enter) . Play.
4 Use the same procedure to set the minutes.
Notes on Repeat Play
Note
ˎ" " indicates that all tracks or files will be repeated until
The clock settings are reset when you disconnect the power
you stop playback.
cord or if a power failure occurs.
ˎ"
1" indicates that a single track or file will be repeated
until you stop playback.
To display the clock when the system is off
ˎIf the power cord is disconnected when the system is on,
Press DISPLAY  repeatedly to display the clock.
Repeat Play is cancelled.
The clock is displayed for about 8 seconds.
Notes on Shuffle Play mode
If the system is in BLUETOOTH Standby mode, the
ˎWhen Shuffle Play mode is set to "SHUF," the system
clock does not appear by pressing DISPLAY .
shuffle-plays all tracks or files on the disc. When Shuffle
Play mode is set to "FLDR SHUF," the system shuffle-plays all
Reception of DAB/DAB+ radio station
tracks or files in selected folder.
ˎWhen you turn off the system, the selected Shuffle Play
(CMT-SBT100B only)
mode ("SHUF" or "FLDR SHUF") is cleared and the play mode
When you turn on the system for the first time
returns to Normal or FLDR Play mode.
after you purchase the system, DAB Automatic
Notes on playing MP3 discs
Scan starts automatically and creates a list of
ˎDo not save unnecessary folders or files on a disc that has
available services. During the DAB Automatic
MP3 files.
Scan, "" appears. Do not press any ˎFolders that have no MP3 files are not recognized on the
button on the unit or the remote during DAB system.
ˎThe system can only play MP3 files that have a file extension
Automatic Scan. Scanning is interrupted and
of ".mp3."
service list may not be created properly. To run
ˎEven when file name has the ".mp3" file extension, if it is
the DAB Automatic Scan manually, perform the
not an audio MP3 file, playing this file may generate a loud
procedure of "Running the DAB Automatic Scan noise, which could cause damage of the system.
manually (CMT-SBT100B only)." If you have moved ˎThe maximum number of MP3 folders and files compatible
with this system is:
to another area, perform the DAB Automatic
 999* folders (including the root folder)
Scan manually and re-register the contents of
 999 files
broadcasts.
 250 files in a single folder
 8 folder levels (in the tree structure of files)
Attaching speaker pads
ˎCompatibility with all MP3 encoding/writing software, CD-R/
RW drive and recording device, and recording media cannot
Attach the supplied speaker pads to the bottom
be guaranteed. Incompatible MP3 discs may produce noise
of the speakers to prevent slipping.
or interrupted audio or may not play at all.
* This include folders that have no MP3 or other files. The 3    
Press and hold FUNCTION and press /
number of folders that the system can recognize may
on the unit.
be less than actual number of folders, depending on the
"STEP 9K" or "STEP 10K" appears in the display
folder structure.
. When you change the interval, all the AM
preset stations are erased.
Creating your own program
(Program Play)
Running the DAB Automatic Scan
manually (CMT-SBT100B only)
1 
Press CD FUNCTION on the remote or press
FUNCTION  on the unit repeatedly until "CD"
Before you can tune in DAB/DAB+ stations, you
appears in the display .
must perform a DAB Initial Scan.
2 Press PLAY MODE  repeatedly until "PGM"
When you have moved to another area, also
appears while the player is stopped.
perform the DAB Initial Scan manually to update
3
Select a folder (MP3 disc only). the DAB/DAB+ service information.
  1 
Press +/ repeatedly to select the Press TUNER FUNCTION on the remote or

desired folder. press FUNCTION on the unit repeatedly
until "DAB" appears in the display .
If you want to program all files in the folder,

press . 2
Press OPTIONS  to display the setting menu.
4
Select the desired track or file number.
3 Press  /   repeatedly to select "INITIAL,"
Press /  repeatedly until the desired 
then press .
track or file number appears.
4
Press  /   repeatedly to select "OK," then
press  .
Scanning begins. The scanning progress is
indicated by asterisks (*******). Depending on
Selected track Total playing time
the DAB/DAB+ services available in your area,
or file number of the selected
scanning may take a few minutes.
track or file
When scanning is complete, a list of available
services is created.
5 Press  .
"--.--" appears when the total playing time Notes
ˎIf your country or region does not support DAB/DAB+
exceeds 100 minutes for an CD-DA or when you
broadcast,"NO SERV" appears.
program an MP3 files.
ˎThis procedure clears all previously stored presets.
6 ˎBefore unplugging the DAB/FM lead antenna, make sure
Repeat steps 3 through 5 to program
the system is turned off to preserve your own DAB/DAB+
additional tracks or files, up to a total of 25
settings.
tracks or files.
7
Press   .
Your program of tracks or files starts playback. Presetting radio stations
The programmed files or tracks remain
available until you remove the disc from the 1
Tune in the desired station.
disc tray  or unplug the power cord.
2
Press TUNER MEMORY  .
To play the same program again, press   .
Preset number
To cancel Program Play
Press PLAY MODE  repeatedly until "PGM"
disappears while the player is stopped.
3 Press TUNE +/   repeatedly to select a
To delete the last track or file of the
preset number.
program
If another station is already assigned to the
Press CLEAR  while the player is stopped. selected preset number, the station is replaced
by the new station.
Notes
ˎIf the disc is ejected after programming, all the programmed 4 Press  to register the station.
tracks or files are deleted.
"COMPLETE" appears in the display .
ˎIf the power cord is disconnected when the system is on,
5
the programmed tracks or files are deleted. Repeat steps 1 through 4 to register other
stations.
You can preset up to 20 FM and 10 AM stations
Listening to the radio (CMT-SBT100 only), or 20 DAB/DAB+ and 20 FM
stations (CMT-SBT100B only).
To tune in to a preset radio station
Tuning in a radio station

Press TUNING MODE repeatedly until "PRESET"
1 
Press TUNER FUNCTION on the remote or
appears in the display , and then press TUNE
press FUNCTION  on the unit repeatedly
+/   to select the preset number to which the
until "TUNER FM" or "TUNER AM" appears
desired station is registered.
(CMT-SBT100), or "DAB" or "TUNER FM"
appears (CMT-SBT100B) in the display.
2 Perform tuning.
Playing a file on a USB device
For automatic scanning
You can play audio files stored on a USB device by
Press TUNING MODE  repeatedly until "AUTO"
connecting a USB memory or USB device to the
appears, and then press TUNE +/   . Scanning
system. The playable audio format is MP3/WMA*/
stops automatically when a station is tuned in,
AAC*.
and "STEREO" (for stereo programs only) appears
Check the websites below for the information
in the display .
about compatible USB devices.
For customers in Europe and Russia:
http://support.sony-europe.com/
For customers in Latin America:
If the scanning does not stop, press   to stop
http://www.sony-latin.com/index.crp
scanning, then perform manual tuning (below).
For customers in other countries/regions:
When you tune in a station that provides RDS
http://www.sony-asia.com/support
services, information such as the service name or
station name is provided by broadcasts. * Files with DRM (Digital Rights Management) copyright
protection or files downloaded from an online music store
For manual tuning cannot be played on this system. If you try to play one of
these files, the system plays the next unprotected audio
Press TUNING MODE  repeatedly until
file.
"MANUAL" appears, and then press TUNE +/  
1 Press USB FUNCTION  on the remote or
repeatedly to tune in the desired station.
press FUNCTION  on the unit repeatedly
until "USB" appears in the display .
Notes on DAB/DAB+ stations (CMT-
SBT100B only) 2
Connect the USB device directly or via the USB
ˎBefore tuning in DAB/DAB+ stations, make sure that the
cable supplied with the USB device to the USB
DAB Initial Scan has been performed.
port  on the unit.
ˎWhen you tune in a station that provides RDS services,
information such as the service name or station name is 3 Press   to start playback.
provided by broadcasts.
ˎWhen tuning in a DAB/DAB+ station, it may take a few
Other operations
seconds before you hear any sound.
ˎPrimary service is automatically received when secondary
To Do the following:
service ends.
ˎThis tuner does not support data services. Pause playback Press  . To resume play,
press the button again.
Tip
To reduce static noise on a weak FM stereo station, press FM Stop playback
Press   . To resume play,
MODE  repeatedly until "MONO" appears to turn off stereo
press  
*1 . To cancel
reception.
resume play, press  
To change the AM tuning interval again .
*2
(except for European and Russian Select a folder  
Press +/ repeatedly.
models)
Select a file Press / 
.
The default setting for AM tuning interval is 9 kHz
Find a point in Hold down / 
(or 10 kHz for some areas). Use the buttons on the
a file (/  on the unit)
unit to perform this operation.
during playback, and release
1
Press FUNCTION  on the unit repeatedly to the button at the desired point.
select the AM station.
Select Repeat
Press REPEAT  repeatedly
2    Play
Press / to turn off the system. until " " (all audio files) or
" 1" (single audio file) appears.
When playing a VBR MP3/WMA file, the system may ˎ You attempt to pair the system with more than
*1
resume playback from a different point. 10 BLUETOOTH devices.
*2 When resume play is canceled, the display returns to the
This system can pair with up to 9 BLUETOOTH
number of folders.
devices. If you pair another BLUETOOTH device
after pairing with 9 devices was performed,
To change the play mode
pairing information of the device that was
Press PLAY MODE  repeatedly while the player
connected with the system first is overwritten
is stopped. You can select Normal Play mode (no
with that of the new device.
indication or "FLDR" appears *1 ), or Shuffle Play ˎ Pairing registration information of this system is
mode ("SHUF" or "FLDR SHUF" appears *2 ).
erased from the connected device.
ˎ If you initialize the system or erase the
*1 When no indication is selected, the system plays all files on
pairing history with the system, all the pairing
the USB device. When "FLDR" is selected, the system plays
all files in the selected folder on the USB device.
information will be erased.
*2 When "SHUF" is selected, the system shuffle-plays all audio
files on the USB device. When "FLDR SHUF" is selected, the About the BLUETOOTH indicator
system shuffle-plays all audio files in the selected folder.
The BLUETOOTH indicator in the center of the
Note on the play mode

BLUETOOTH button allows checking of the
If the power cord is disconnected when the
BLUETOOTH status.
system is on, the play mode returns to Normal
Play. System status Indicator status
Notes on Repeat Play The system is in Flashes slowly in blue.
BLUETOOTH Standby
ˎ" " indicates that all files will be repeated until you stop
(when the system is on).
playback.
ˎ" 1" indicates that a single file will be repeated until you
During BLUETOOTH Flashes quickly in blue.
stop playback.
pairing
ˎIf the power cord is disconnected when the system is on,
Repeat Play is cancelled.
The system is Flashes in blue.
attempting to connect
Note on Shuffle Play mode
with a BLUETOOTH
When you turn off the system, the selected Shuffle Play
mode ("SHUF" or "FLDR SHUF") is cleared and the play mode device.
returns to Normal Play mode (no indication or "FLDR").
The system has Lit in blue.
Notes established in
ˎThe playback order for the system may differ from the
connection with a
playback order of the connected digital music player.
BLUETOOTH device.
ˎBe sure to turn off the system before removing the USB
When "BT STBY" is Flashes slowly in blue.
device. Removing the USB device while the system is turned
on may corrupt the data on the USB device. set to "ON" (when the
ˎWhen USB cable connection is necessary, connect the USB
system is off)
cable supplied with the USB device to be connected. For
When "BT STBY" is set Goes off.
details on connection, refer to the operation manual of the
USB device. to "OFF" (when the
ˎIt may take time before "READING" appears after
system is off)
connecting, depending on the type of USB device
connected.
ˎDo not connect the USB device through a USB hub. Enabling reception of AAC codec
ˎWhen the USB device is connected, the system reads all the
You can receive data in AAC codec format from a
files on the USB device. If there are many folders or files on
BLUETOOTH device. To enable reception, set up
the USB device, it may take a long time to finish reading the
USB device. using the option menu.
ˎWith some connected USB devices, it may take a long time
1 
Press OPTIONS to display the setting menu.
to transmit signals from the system or to finish reading the
USB device. 2
Press  /   repeatedly to select "BT AAC,"
ˎCompatibility with all encoding/writing software cannot be
then press  .
guaranteed. If audio files on the USB device were originally
encoded with incompatible software, those files may 3   
Press / repeatedly to select "ON" or
produce noise or ,may malfunction.

"OFF," then press .
ˎThe maximum number of folders and files on the USB
device compatible with this system is: ON: to receive in AAC codec format
 1,000* folders (including the root folder)
OFF: to receive in SBC codec format
 3,000 files
 250 files in a single folder Notes
 8 folder levels (in the tree structure of files) ˎIf you initiate setup during BLUETOOTH connection, the
connection is cut.
* This includes folders that have no playable audio file and
ˎWhen using an Apple product, update it to the latest
empty folders. The number of folders that the system
software version. For details on updating, refer to the
can recognize may be less than actual number of folders,
depending on the folder structure. operation manual supplied with your Apple product.
ˎIf sound is interrupted during reception in AAC codec
ˎThe system does not necessarily support all the functions
format, set the BT AAC menu to "OFF."
provided in a connected USB device.
ˎFolders that have no audio files are not recognized.
Pairing the system with a BLUETOOTH
ˎThe audio formats that you can listen to with this system are
device
as follows:
 MP3: file extension ".mp3"
Connection example
 WMA: file extension ".wma"
 AAC: file extension ".m4a," "mp4" or ".3gp"
Note that even when file name has the correct file
extension, if the actual file differs, the system may produce
noise or may malfunction.
Charging a USB device or iPod/
iPhone/iPad
If you connect a USB device or iPod/iPhone/iPad
to the USB port  when the system is turned on,
charging begins automatically.
BLUETOOTH device
To stop charging the USB device such as a "WALKMAN"
Press  /   to turn off the system, and then
1
Place the BLUETOOTH device to be connected
disconnect the USB cable.
within 1 meter from the system.
Notes
2
Press BLUETOOTH FUNCTION  or press
ˎYou cannot charge the USB device or iPod/iPhone/iPad
FUNCTION  on the unit repeatedly until
when the system is off. Some USB devices and iPod/iPhone
"BLUETOOTH" appears in the display  .
may not be charged owing to their characteristics.
ˎIf the system enters Standby mode during charging of a
ˎ The BLUETOOTH indicator  flashes slowly
USB device or iPod/iPhone/iPad, the charging stops in
in blue.
progress. Before charging, turn off the Automatic Standby
ˎ If the system has been automatically
function. For details, see "Setting the Automatic Standby
connected with the BLUETOOTH device in
function."
the past, press BLUETOOTH  on the unit to
cancel the connection so that "BLUETOOTH"
appears in the display  .
Using the BLUETOOTH function
3
Press and hold BLUETOOTH  on the unit for
You can listen to music from your iPod/iPhone/ 2 seconds or longer.
iPad or BLUETOOTH device over a wireless 
The BLUETOOTH indicator flashes quickly in
connection.
blue and "PAIRING" flashes in the display  .
Before using the BLUETOOTH function, perform
The system is in Pairing mode.
pairing to register your BLUETOOTH device.
4
Perform the pairing operation on the
BLUETOOTH device and search for this system
The system supports registration and connection
with the BLUETOOTH device.
of the BLUETOOTH device and NFC, which enables
data communication by just touching a specified When searching has finished, a list of the
devices found may appear on the BLUETOOTH
location. For details on NFC, see "Connecting by
device display.
one-touch action (NFC)."
ˎ This system appears as "SONY:CMT-SBT100"
What is pairing?
or "SONY:CMT-SBT100B." If it does not appear,
The BLUETOOTH devices to be connected must be perform the procedure from step 1 again.
registered with each other beforehand. Pairing is ˎ When establishing connection with this
an operation of registering two devices. system, select the audio profile (A2DP, AVRCP)
Once a pairing operation is performed, it does on the BLUETOOTH device.
not have to be performed again. In the following ˎ If the BLUETOOTH device does not support
cases, however, a pairing operation must be
AVRCP (Audio Video Remote Control Profile),
performed again: you cannot perform playback or stop
ˎ Pairing information was erased when the playback with the system.
ˎ For details on operations of the BLUETOOTH
BLUETOOTH device was repaired.
device to be connected, refer to the operation
manual supplied with your BLUETOOTH
device.