Page 1
INSTALLATION MANUAL DIGITAL MULTIFUNCTIONAL SYSTEM MX-M264U/M264N/ M264NV/M264NR MX-M314U/M314N/ M314NV/M314NR MX-M354U/M354N/354NR MODEL Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with specified ones for maintaining the safety and performance of the set.
(An electrical work is required.) Use of a step-up transformer is also available. In this case, the capacity must be great enough for the max. power consumption of the machine. MX-M264U Transit, Installation (using) environment, Note - i...
Page 3
(5) Vibration Avoid installation near a machine which produces vibrations. If vibrations are applied to the copier machine, copy images may be deflected and a trouble may be caused. MX-M264U Transit, Installation (using) environment, Note - ii...
Transit of the machine must be made in packed condition to the installing place. Use care not to exert vibrations or shocks to the machine when in transit. B. Delivery Remove the packing materials prior to installation in the office envi- ronment. MX-M264U Transit, Installation (using) environment, Note - iii...
Page 5
B. Fixing tape and protection material removal figure for future use. Close the tray which was pulled out. (2) Scanner (2/3 mirror unit) lock release Remove the optical unit fixing screw, and remove the note label. MX-M264U MX-M264U/M314U/M354U/M264N/M314N/M354N/M264NV/M314NV/M264NR/M314NR/M354NR (MAIN UNIT) 2 – 1...
DV seal, clean and remove it. cannot be selected. NOTE: After supplying developer into the developer unit, do not tilt or shake the developer unit. Attach the developer unit to the copier, and fix it with the screw. MX-M264U MX-M264U/M314U/M354U/M264N/M314N/M354N/M264NV/M314NV/M264NR/M314NR/M354NR (MAIN UNIT) 2 – 2...
Page 7
The guide plates A and B are slidable. Slide each guide plate while squeezing its lock lever. MX-M264U MX-M264U/M314U/M354U/M264N/M314N/M354N/M264NV/M314NV/M264NR/M314NR/M354NR (MAIN UNIT) 2 – 3...