Bosch EN1210 Series Specifications

Intrusion Alarm Systems | EN1210 Series Universal Transmitters
EN1210 Series Universal Transmitters
www.boschsecurity.com
The Universal Transmitters can make nearly any
normally‑open (NO) or normally‑closed (NC) sensor a
wireless device. The Universal Transmitters work with
shock sensors, holdup buttons, pressure mats,
temperature sensors, status relays, other devices.
The line of universal transmitters contains the
following products:
• EN1210 Universal Transmitter (Single‑input)
• EN1210EOL Universal Transmitter with EOL Resistor
• EN1210SK Survey Transmitter
• EN1210W Door‑Window Transmitter with Reed
Switch
• EN1210‑3600 Universal Transmitter (1 hr check‑in)
The Inovonics EchoStream platform uses diversity
reception and advanced signal processing to reduce
dead spots in transmission areas. The transmitters
have superior range and reliability, and are ideally
suited for commercial or residential installations. They
are fully supervised and include a battery, a case
tamper, and a mounting bracket.
System overview
Powered by Inovonics
The Inovonics EchoStream platform, powered by
Inovonics wireless mesh network technology, ensures
superior range, reliability, and scalability for
Programmable as normally‑open (NO) or
u
normally‑closed (NC)
Small unobtrusive design
u
Fully supervised
u
Includes battery, case tamper, and mounting
u
bracket
Exclusive wireless protocol ensures maximum
u
performance and reliability
commercial applications. Using a wide range of
transmitters and repeaters, this proven technology
provides flexibility and performance to meet the most
stringent requirements.
Wireless 900 MHz Band
The Inovonics EchoStream platform sends redundant
information on several multi-frequency channels within
the FCC Part 15 900 MHz band, providing superior
range and reliability. In comparison, systems that use a
single frequency technology can only send information
on one narrow band channel. Any interference within
the band can cause missed signals. With wireless
registration, it is easy to add this technology to any
application.
Functions
NO or NC Operation
The universal transmitters work with any standard NO
or NC contact (15 ms duration) or sensor.
Supervision
The cover tamper and battery activity are supervised.
Monitoring helps ensure reliable operation.