PP932TM/KM/BM
GE Profile
Series 30" Built-In CleanDesign Electric Cooktop
™
Dimensions and Installation Information (in inches)
Note: Check local codes for required breaker size
†
KW Rating
Important: Requires a 5" free area between the
240V
8.6
bottom of the cooktop to any combustible material,
208V
6.5
i.e., shelving. Free area not required when installing
Breaker Size
wall oven underneath cooktop. Refer to installation
instructions. Requires a 15" minimum from cooktop to
240V
40 Amps
†
adjacent overhead cabinets. Units are furnished with a
208V
40 Amps
†
48" flexible armored cable.
Note: 30" Ribbon cooktops are approved for use over select GE 27" and GE 30"
Single Wall Ovens and Warming Drawers. Refer to cooktop and wall oven/
warming drawer installation instructions packed with product for current
dimensional data. If installed with a GE Profile
consult both the cooktop and downdraft installation instructions packed with
product before installing. Cooktop gas/electric supply may need to be re-routed
to install downdraft. Consult cabinet and countertop manufacturer's specs for
flush mount installation prior to install. Before installing, consult installation
instructions packed with product for current dimensional data.
Filler Trim Kit: When replacing an old GE 30" cooktop (with larger opening)
use the following one-piece trim kit to fill in the over-size hole. Available at
additional cost. JXTR32W (True White) JXTR32B (Black glass) JXTR32C
(True Bisque)
Telescopic Downdraft System,
™
For answers to your Monogram
questions, visit our website at geappliances.com
or call GE Answer Center
®
or GE
appliance
®
®
service, 800.626.2000.
Specification Revised 3/13
Listed by
Underwriters
Laboratories
220585