Acer Nitro XZ3 Series Quick Start Manual

Acer LCD Monitor Quick Start Guide (QSG)
Important safety instructions
Please read the following instructions carefully.
1. To clean the LCD monitor screen: Be sure that your monitor is electrically rated to operate with the AC power available in your location.
• Turn off the LCD monitor and unplug the power cord.
• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.
2.
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE.
3.
PLEASE DO NOT USE ANY AMMONIA OR ALCOHOL-BASED CLEANERS ON THE LCD DISPLAY SCREEN OR CASE.
4. Acer will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
5. Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight can severely damage it.
6. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display.
7. Do not remove the cover or attempt to service this unit yourself. An authorized technician should perform servicing of any nature.
8. Store the LCD monitor in a room with a temperature of -20° to 60°C (-4° to 140°F). Storing the LCD monitor outside this range may
result in permanent damage.
9. Immediately unplug your monitor and call an authorized technician if any of the following circumstances occur:
• Monitor-to-PC signal cable is frayed or damaged.
• Liquid spills onto the LCD monitor or the monitor is exposed to rain.
• The LCD monitor or case is damaged.
Package contents
LCD monitor Power cord
Attaching the monitor to the base
1. Remove the monitor from the packaging.
2. Attach the footstand to the monitor by screw, attach the base to the footstand.
3. Secure the base to the stand by turn the screw clockwise using a screwdriver or a suitable coin.
Connecting Your Monitor to a Computer
1. Turn off your monitor and unplug your computer's power cord.
2.
2-1 Connect DP cable(Optional, Only DP-input model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the DP cable to the computer.
2-2 Connect HDMI cable (Optional,Only HDMI-input model)
a. Make sure both the monitor and computer are powered-OFF .
b. Connect the HDMI cable to the computer.
3. Insert the monitor power cable into the power port under the monitor.
4. Plug the power cord of your computer and your monitor into a nearby
electrical outlet.
External controls
No. Icon
1
/
2
/
3
/
4
/
5 POWER
HDMI cable
(Optional)
1 2 3 4 5
Item Description
a. Press to view Main page. Press again to enter mode select function.
Mode/Exit b. When the Function Menu is active. Press to return previous Menu or
exit current Menu.
a. Press to view Main page. Press again to enter brightness adjustment
function.
Brightness/
Enter
b. When the Function Menu is active, this button will enter a selection in the
OSD.
a. Press to view Main page. Press again to enter Input select function.
Input/-
b. When the Function Menu is active, press this button selected or move to the
previous function.
a. Press to view Main page. Press again to enter next function in the
Menu/+
Function Menu.
b. When the Function Menu is active, press this key selected or move to
the next function.
Turns the monitor on/off.
Power button
Blue indicates power on. Orange indicates standby/power saving
mode.
DP cable Quick start
(Optional)
guide
HDMI1
HDMI2 Power Cable
DP
LCD Monitor Quick Setup Guide