Page 1
Form No. 3439-284 Rev A Debris Suppression Kit ProLine H800 Rotary Mower Model No. 134-4690 Installation Instructions Installation Loose Parts Use the chart below to verify that all parts have been shipped. Description Qty. – No parts required Prepare the machine.
Page 2
Installing the Kit Installing the Kit Open the hopper door. Line up the door screen with the existing door mesh. Use the 4 holes on the door screen to mark the 4 drill locations on the door mesh. Drill 7.0mm holes in the door mesh at the marked locations. Install the door screen onto the door mesh with 4 bolts, 8 washers, and 4 nuts (Figure g320409...
Page 3
g217355 Figure 2 1. Release lever 2. Hopper screen Remove the existing hopper screen (Figure g215931 Figure 3 Install the new hopper screen and lock it in place. Maintenance Cleaning the Hopper Screen Service Interval: Before each use or daily Open the hopper door.