JVM1530DM
GE
1.5 Cu. Ft. Capacity Over-the-Range Microwave Oven
®
Dimensions and Installation Information (in inches)
Note: When replacing a 36" range hood, this kit fills in the
additional width to provide a custom, built-in appearance.
For installation between cabinets only; not for end-of-cabinet
installation. Each kit contains two, 3"-wide filler panels.
Important Information: When installing the Spacemaker
microwave oven over a range, allow minimum of 2" from bottom
of Spacemaker microwave oven to top of range backguard to
allow for removal of light covers.
Ventilation Options: The Spacemaker microwave oven
is designed for adaptation to the following three types of
ventilation:
• Outside exhaust (vertical)
• Outside exhaust (horizontal)
• Recirculating (non-vented ductless – see Filter Kit drawing)
Installation Information: This information is not intended to
be used for installing unit described. Before installing, consult
installation instructions packed with product/kit for current
dimensional data.
For answers to your Monogram,
GE Profile
®
GE
appliance questions, visit our website at
®
ge.com or call GE Answer Center
service,
®
800.626.2000.
12" Filler Panel Kits
JX41–Black
JX40WH–White
15" Filler Panel Kits
JX48BL–Black
JX48WH–White
Over-the-Range Microwave Oven
Dimensions (in inches)
21-3/4
or
™
Door open
Optional Accessories (Available at additional cost)
66" MIN.
Mounting
height
from floor
Minimum distance from
door hinge side to adjacent
wall should equal 1/2-inch.
Filter KitsJX81–Recirculating
Charcoal Filter Kit
To be used when the
Spacemaker microwave oven
cannot be vented to the outside.
30" MIN.
Exhaust outlet
width required
connects to
3-1/4" X 10" duct
13"
MAX.
12"
MIN.
15-1/16
16-1/2
15-3/4
Specification Created 7/07
Listed by
Underwriters
Laboratories
340198