Table of Contents
Advertisement
Quick Links
DMC4
Dynalite Modular Controller (4 Output Modules)
Installation Instructions
Warning..................................................... 2
Features..................................................... 2
Important Safeguards................................... 2
Internal View............................................... 3
Mounting.................................................... 4
Module mounting......................................... 5
Dynalite manufactured by WMGD Pty Ltd (ABN 33 097 246 921) Unit 6, 691 Gardeners Road Mascot NSW 2020 Australia Tel: +61 2 8338 9899 Fax: +61 2 8338 9333
E-Mail: support.controls@philips.com
DMC4 Installation Instructions Rev 02 Specifications subject to change without notice
Final Checks.............................................. 6
Dimensions................................................. 7
Specifications.............................................. 8
Web: http://philips.com/dynalite
Sales@automated.net.au
+61 2 9247 0731
Head Office: Suite 4, Level 5
37 Pitt Street
Sydney NSW 2000
Australia Wide
Advertisement
Table of Contents
Related Manuals for Philips DYNALITE DMC4
Summary of Contents for Philips DYNALITE DMC4
-
Page 1: Table Of Contents
DMC4 Installation Instructions Rev 02 Specifications subject to change without notice Dynalite manufactured by WMGD Pty Ltd (ABN 33 097 246 921) Unit 6, 691 Gardeners Road Mascot NSW 2020 Australia Tel: +61 2 8338 9899 Fax: +61 2 8338 9333 E-Mail: support.controls@philips.com Web: http://philips.com/dynalite... -
Page 2: Warning
Modules supplied separately. mode. A new Philips Dynalite user interface on the same network will turn all output lighting channels on from button 1 and off from button 4 allowing testing of network The DMC4 is only compatible with Philips cables and terminations. -
Page 3: Internal View
Control Communication bus connection module 4 install location High voltage barrier Comms module Communication bus connection install location Data cable entry points For spare parts, please call your nearest Philips Dynalite Customer Service Centre. DMC4 Installation Instructions Rev 02... -
Page 4: Mounting
Mounting For surface mounting, six mounting points have been provided. Refer to the location of the mounting points in the dimension drawings on page 7 of this document. For recess mounting, six holes suitable for M6 (1/4”) fasteners have been provided on side walls as shown below. Minimum spacing between studs is 432mm (17”), minimum mounting depth 103mm (4.1”) Ensure no dust or other debris enters the device during... -
Page 5: Module Mounting
Module mounting Before starting: Remove the knockouts you intend to run the supply cables through – lighting group supply and network supply first – then mount the DMC4 (surface or recessed, as required). Once the unit is secured to the intended mounting wall follow the steps below for the different module mounting. Supply Cables: The supply input terminals are located on the DSM Module toward the top of the enclosure and consist of Neutral and Phase terminals, all of which will accept up to 16mm... -
Page 6: Final Checks
1. After removing both front covers and the required knockouts for the power supply, networking cable and lighting group channels, mount the unit in its desired location. Once secured, the DMC4 unit is ready for the internal modules to be mounted. -
Page 7: Dimensions
Dimensions 340mm 13.4in 445mm 17.5in 106mm 4.2in DMC4 Installation Instructions Rev 02... -
Page 8: Specifications
DMC4 Installation Instructions Rev 02 Specifications subject to change without notice Dynalite manufactured by WMGD Pty Ltd (ABN 33 097 246 921) Unit 6, 691 Gardeners Road Mascot NSW 2020 Australia Tel: +61 2 8338 9899 Fax: +61 2 8338 9333 E-Mail: support.controls@philips.com Web: http://philips.com/dynalite...